1. DL manuals
  2. Game Group
  3. Swimming Pool Filter
  4. 4516
  5. Owner's Manual

Game Group 4516 Owner's Manual - 1.888.339.2546

Manual is about: SandPRO 25 Pool Filter System

Summary of 4516

  • Page 1

    Sandpro™ 25 pool filter system owner’s manual model 4516 sand not included. Use only no. 20 silica sand with a particle size of 0.45 mm – 0.55 mm important safety rules read all instructions before assembling and using this product. Keep this manual. Important do not return product to store for tech...

  • Page 2: 1.888.339.2546

    2 save these instructions your pool filter system has been engineered and manufactured to our highest standard for dependability, ease of operation and safety. With proper care, it will give you years of durable, trouble-free performance. Thank you for your purchase. Prior to assembling and using th...

  • Page 3

    Save these instructions 3 table of contents 1. Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 how sand filtration works . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    4 save these instructions 1. Safety warnings read all warnings below. Failure to do so could result in serious personal injury or death. • risk of suction entrapment hazard, which, if not avoided can result in serious injury or death. • do not block pump suction at the pump or in the pool as this ca...

  • Page 5

    Save these instructions 5 2. General information this manual provides information relating to the installation, utilization and maintenance of the pool filter system. The pump included with the filtration system is a horizontal, self-priming centrifugal pump. For the pump to function correctly, the ...

  • Page 6

    6 save these instructions 4. Parts list/reference before starting installation, check to make sure all parts are present in package. Primary components base plate (1) water pump (1) filter tank (1) 7 position multi-port valve (1) spigot clamp ring assembly (1) drain valve assembly (1) filter pump ho...

  • Page 7

    Save these instructions 7 5. Getting started unpacking your filter system this product requires assembly. Carefully remove the product and all parts. Make sure all items listed in the parts list/reference are included. Please note that some parts may be pre-assembled. Inspect everything carefully to...

  • Page 8

    8 save these instructions 6. Assembly instructions water pump assembly 1. Secure the water pump to the base plate with the provided pump mounting hardware. See figure 1. 2. Screw the 1¼”-1½” hose connector into the center port of the water pump. Ensure that o-ring a (2¼” dia) is installed between th...

  • Page 9

    Save these instructions 9 5. Securing the filter assembly. A. Install the main tank seal around the bottom of the 7 position multi-port valve. See figure 6. Note: apply a good amount of silicone grease or pool lube around the seal before installing it onto the valve. This will allow for an easier in...

  • Page 10

    10 save these instructions 7. Connecting the filter system the next section outlines installation instructions for connecting the pool filter system to your pool. Since the hoses utilized for filtration and return lines differ for various types of above-ground pools, the pool-filter connection secti...

  • Page 11

    Save these instructions 11 b. For pools with 2¼” diameter threaded hose connectors these instructions assume that the pool is already assembled with hoses attached to the water intake and return ports on the pool. 1. Short intex® adapter installation a. Screw the short intex® adapter into the transp...

  • Page 12

    12 save these instructions 8. Valve operations make yourself familiar with your filter system’s valve settings and functions. Filter valve settings & functions setting complete water flow/function filtration function: vacuum, regular pool filter action. This is the setting the filter will be set to ...

  • Page 13

    Save these instructions 13 9. Filter operations start up once the filter system has been properly assembled, the sand chamber filled with sand and the hoses connected, you may begin with filtration. However, we recommend that you clean and prepare the new sand that is in the sand chamber first. Clea...

  • Page 14

    14 save these instructions 10. Maintenance the chart below outlines the recommended maintenance schedule for your pool filter system. Intervals maintenance items weekly backwashing, regardless of the pressure or how dirty the filter might be cleaning of the debris/lint filter in the hair and lint st...

  • Page 15

    Save these instructions 15 11. Troubleshooting problem cause solution pressure gauge has reading over 15 psi dirty filter bed backwash the filter. Pressure is too low hair and lint strainer basket is dirty clean the hair and lint strainer. Air in the pump poor seal on the intake side of the pump tig...

  • Page 16: 1.888.339.2546

    16 save these instructions 12. Limited warranty statement the manufacturer warranties safe operation and reliability only under the following conditions: the filter system is installed and operated according to the assembly and operating instructions. Only original replacement parts are used. Consum...

  • Page 17

    Save these instructions 17.

  • Page 18: 1.888.339.2546

    Great american merchandise & events™ 16444 n. 91st street scottsdale, az 85260-1567 u.S.A. Tel: 888.382.5988, 602.957.3825 fax: 602.957.7665 email: products@game-group.Com www.Game-group.Com 4516_r1a_im_4517_r2a_121412 © 2012 game™ all rights reserved. Information subject to change. Look for other g...