GAME SolarPRO 4512 Owner's Manual - page 5
5
SAVE THESE INSTRUCTIONS
Solar Heater Location
Your solar heater needs to be located on a hard level surface You will need to position the heater lower than the pool’s water level
and at a safe distance away from the pool (see Section 1, Safety Warnings)
• The unit(s) should never be placed on the roof of any structure, or more than 60” above the water level
of the pool
• The unit(s) may be angled toward the sun using the legs provided Do not exceed the angle the legs
produces, or 30 degrees from horizontal in any direction
NOTE: The solar heater is to be installed between the filter and the pool water inlet, AFTER the water is
filtered. The heater must come after the filter to prevent buildup in the tubing.
CAUTION
Before loosening any threaded connections on your filter, pump or pool, be sure that
the suction and pressure hoses on the filter are closed or blocked to prevent water flow.
3. PARTS LIST/REFERENCE
Primary Components
MAIN BASE WITH STAND (1)
1¼”-1 ½” HOSE REDUCER (2)
COLLARED TUBE ADAPTER with O-RING (1)
HOSE CLAMP (2)
THICK CONNECTOR GASKET (1)
LONG FILTER HOSE (1)
SIDE HOSE CONNECTOR with O-RING (2)
SHORT HOSE (1)
CLEAR DOME with CLOTH COVER (1)
OWNER’S MANUAL
Note:
Some parts may be pre-installed at the factory. Parts not shown to scale.
Only used with 2¼” diameter
threaded hoses
Only used with multiple
unit hook-ups
Meijer.com