1. DL manuals
  2. Game Winner
  3. Ice Maker
  4. 07-4101-GW
  5. Instructions For The Use

Game Winner 07-4101-GW Instructions For The Use

Summary of 07-4101-GW

  • Page 1

    Rev052611 manual meat cuber/ tenderizer model no. 07-4101-gw save these instructions! Refer to them often and use them to instruct others. Attention! If any components of this unit are broken, do not operate properly, or for product returns, please contact weston products llc phone: 1-800-814-4895 (...

  • Page 2

    -2- 1 2 3 4 5 6 7 9 10 11 12 15 16 13 14 8 7 13 c-clamp -12- weston products llc warrants to the original retail purchaser of this product that if operated in accordance with the printed instruction accompanying it, then for a period of 1 year from the date of purchase, the product shall be free fro...

  • Page 3

    -3- component list diagram part part number description number 1 bottomhousing 07-4110-gw 2 tophousing 07-3181-gw 3 handle 07-3125-gw 4 bladeassembly 07-3103 5 leftcomb 07-3306 6 rightcomb 07-3305 7 housingthumbscrew(2) 07-3166 8 handlethumbscrew 07-3505 9 supportleg 07-4103-gw 10 countertopprotecto...

  • Page 4

    -4- -9- warning! Save these instructions! Refer to them often and use them to instruct others. 1. Caution sharp blades! Wear kevlar, cut-resistant gloves (sold separately) when handling the blades. 2. Never reach into the cuber/ tenderizer. Doing so could cause serious injury. Always use the provide...

  • Page 5

    -5- assembly instructions warning! Protective/cut-resistant kevlar gloves are recommended whenever handling the blade assembly! 1. Remove the housing thumbscrews securing the top housing to the bottom housing (figure 1). 2. Remove the top housing and blade assembly from the bottom housing. Caution! ...

  • Page 6

    -6- warning! Protective/cut-resistant kevlar gloves are recommended whenever handling the blade assembly! -7- directions for use 1. Make sure the support leg/c-clamp is firmly attached to the work surface and the handle can freely rotate. 2. Make sure the combs are properly installed. Do not use the...