GameSir G3v User Manual - page 4
※
Product Function
Power On / Off
Power LED Indicator
Charging Indication
1. Charge through charging cable
2. Charge under sleeping mode
1. Power On: Press HOME button for 2 seconds to start.
2. Power Off: Press HOME button for 5 seconds to power off.
Sleeping Function
Vibration Intensity adjustment
Vibration frequency adjustment
Exchange the position of left joystick and D-Pad
1. The Game controller enters sleep state after 2-minute disconnection.
2. The Game controller enters sleep state after 5-minute no action.
Press Clear + Up/down button of the D-Pad to choose the increase/decrease the vibration intensity.
Press Clear + Left/Right button of the D-Pad to choose the higher/lower vibration frequency
Press Clear+L3 to exchange the position of left joystick and D-Pad.
LED 1-LED 4 lights: more than 75% battery power left
LED 1-LED 3 lights: 50%-75% battery power left
LED 1-LED 2 lights: 25%-50% battery power left
Only LED 1 light: 10%-25% battery power left
LED 1 shining: less than 10% battery power left.
When connect the charging cable, the LED lights from Number 1 to Number 4 will lights in turns, the four lights keep on when
it is fully charged.
When connect the charging cable, the Game controller wakes up and enters current mode, no signal receiving after 1 minute.
LED lights from number 1 to 4 will lights in turns. Four LED lights keep on when it is fully charged.
5
6