Gamma 8800 Els Owner's Manual - Mounting The Frame
12
MOUNTING THE FRAME
Shoulder Support Adjustment
The shoulder supports are designed to ro-
tate and can be adjusted to provide maximum
support to the racquet frame. Rotate the
support so that the pads contact the frame
squarely when the arms are closed against
the racquet. Should the shoulder supports
block string holes, adjust the frame support
slides to re-position the racquet between the
arms so the shoulder supports make contact
with the racquet between grommet holes.
Securing the Shoulder Supports
To secure the racquet frame with the shoul-
der supports, rotate the large adjustment
knobs on the outside of the mounting stands
clockwise to bring the mounting arms to-
gether. Adjust until firm contact is made
between the shoulder supports and the
frame.
The tear drop shaped holes torwards the
back of the shoulder supports are handy for
holding the loose end of the string while
pulling the string through the racquet. Simply
insert the loose end into the tear drop shaped
holes and slide the string into the point of the
hole.
Frame Support Slide Adjustment
The Frame Support Slide need only be adjusted
if the shoulder supports are blocking a
grommet hole. Do not extend the Frame
Support Slide beyond the machined line located
on the Support Slide.
Apply a final adjustment to all racquet support
points until the racquet is firmly secured in the
mounting system.
Should the frame supports lose contact with the
frame while stringing, they should be re-
adjusted, as needed, to maintain contact with
the racquet frame.