Gamma speaker User Manual - Absorbent Hole
of
256
10
Test Strip
1
Absorbent Hole
Apply a drop of blood here.
The blood will be automatically absorbed.
2
&
has been applied to the absorbent hole in the strip.
3
Test Strip Handle
Hold this part to insert the strip into the slot.
4
Contact Bars
Insert this end of the test strip into the meter. Push it in
ATTENTION:
The front side of test strip should
face up when inserting test strip.
Test results might be wrong if the
contact bar is not fully inserted into
Front
the test slot.
NOTE
The GAMMA SPEAKER meter should only be used with GAMMA Test
Strips. Using other test strips with this meter can produce inaccurate results.