Gamma sports 200 waterfront drive pittsburgh, pennsylvania 15222 phone : 800.333.0337 fax : 412.323.0317 visit our website at www.Gammasports.Com copyright 2012 gamma sports - all rights reserved mman-32 (mp62f-12) owner's manual issue 6 - november 2012 602fc stringing machine.
2 15 sb sq t b parts drawing 5 mcfct 14 mmspp13 381 133 21a 189 187 188 4a 8 9 6a 9 6a 190 284 144 356 140 357 141 146a 271 mqac11 10b mfspp11 mrsg 29 28 27 25 26 31 30a 83 30 162 163 161 35 34 262 mbmsp11 268 261 267.
14 mbfs11 badm frame support mbmss11 badm mounting sys upg mbfc badm floating clamp mdcsc badm fixed clamp mpg starting clamp mpmc machine cover mps cleaning stone mpxfs floor stand sgsm stringer’s mat parts list 4a turntable bushing 5 rubber foot 6a cap screw- m8x25 8 bushing set screw 9 washer- m8...
4 features machine features drop weight tensioner with 9 to 90 lbs range and permanently engraved weight scale patented parallel jaw rotating ratchet gripper with diamond dust coated gripping surfaces professional six point “ quick mount ” racquet mounting system- accommodates all racquets professio...
12 adjusting the clamp pressure the clamps provided with your stringing ma- chine will need minor adjustments according to what string type, construction, and gauge you are using. To adjust the gap (clamping pressure) between the clamp jaws, insert the string through the racquet as if you were begin...
6 frame shoulder support arm adjustment being sure the shoulder supports are free to swivel in their mountings, simultaneously rotate the shoulder support adjustment knobs clockwise until both shoulder supports gently and squarely contact the frame. The shoulder supports are designed to rotate and c...
10 stringing the frame weaving the cross strings weave the cross strings over and under the main strings being careful to alternate the weave direction of each consecutive cross string so as to be opposite of the previously installed cross string. Once the fi nal cross string is tensioned and clampe...
8 gripping the string while holding the tension bar slightly above horizontal, wrap the free string clockwise around the gripper drum once and position between the gripper jaw. Gently turn the gripper clockwise while squeezing the jaws together until all slack in the string is removed. Note: for pro...
