Mman-31 (mpst2-13) gamma sports 200 waterfront drive pittsburgh, pennsylvania 15222 phone: 800.333.0337 fax: 412.323.0317 visit our website at www.Gammasports.Com copyright 2012 gamma sports - all rights reserved owner’s manual issue 7 - december 2012 stii stringing machine.
19 parts drawing mfspp11 sq sb t b 5 104 mqac12 mdcsc13 335 mmspp13 320 192 337 270 21a 9 360 105 6a 356 144 140 141 146a 283 285 286 336 327 8a 133 14 357 mbmsp11 358 289 371.
18 parts list 5 rubber foot 6a cap screw- m8x30 8a set screw 9 washer- m8 14 washer- m10 21a frame support slide 104 tensioner assembly 105 retainer screw 133 frame supp slide screw 140 mtng stand top plate 141 mtng stand top pad 144 shlder supp lock knob 146 supp arm adjust knob 192 pii stii base c...
4 features machine features manual spring tension winder with 11 to 89 lbs tension range patented roller guide for maximum accuracy and consistency parallel jaw gripper with diamond dust coated gripping sur- faces professional six point “quick mount” racquet mounting sys- tem- accommodates all racqu...
16 adjusting the string clamp jaw spacing the string clamps will need minor adjust- ments according to what string type, construc- tion, and gauge you are using. To adjust the gap (clamping pressure) between the clamp jaws, insert the string through the racquet as if you were begin- ning the main st...
6 clamp head installation the post of the string clamp head and tube of the string clamp base are treated with grease to provide protection against corrosion during shipping. Remove any excessive grease with a clean cloth prior to use. The post and tube may also be cleaned with isopropyl alcohol. Af...
14 maintenance & adjustments if the lever releases before 60 lbs., using the supplied l-shaped hex wrench, turn the adjustment screw (b) located on the left side of the latch block counter-clockwise to increase the engagement of the brake release latch with the brake lever. Repeat step 1 and adjust ...
8 mounting the frame securing the frame shoulder clamps lock the shoulder supports in position by turning the knob at the base clockwise. Repeat the adjustment procedure for the remaining support post. Re-tighten all of the frame supports in the same order as before. Do not overtighten any of the su...
12 additional features badminton shoulder support protec- tion pad installation slide the badminton shoulder support cover over the shoulder supports. There is no need to remove the tennis shoulder supports. Note: an optional badminton frame support for the head of the racquet is available. Locking ...
10 stringing the frame travel stop setting the gripper jaw spacing the gripper jaws of the tensioner are adjust- able to accommodate varying string gauges. If the string slips through the gripper jaws while pulling tension, rotate the gripper jaw adjustment screw counter-clockwise. If the string is ...
