Gansow 41 B 57 Service Manual - page 30
28
ENGLISH
Table of recommended checks, inspections and maintenance and
schedule, based on daily use of about four hours;
Description of control
interval interval interval interval interval
WK.LY MTH.LY 4/MTH
6/MTH
YR.LY
1. General controls
Check the fixing and condition of the brush
X
Check for water leaks from the tanks
X
Clean the solution tank filters
X
Make sure the switches and indicator lights
on the panel are working correctly
X
Check that the squeegee blades are not
worn or damaged
X
Check that the squeegee is correctly
adjusted and adheres to the ground when
suction is activated
X
Grease the head raising and squeegee
lever rotation pins
X
Make sure there are no foreign bodies in the
drive wheels and check the tyres are not
worn
X
2. Motors
Check, if possible, wear of the drive motor
carbon brushes and replace if necessary
X
Check wear of the brush motor carbon
brushes and replace if necessary (battery
powered models only)
X
Check wear of the suction motor carbon
brushes and replace if necessary
X
3. Drive
Ensure cables are not damaged or loose
X