Summary of CDR-01S
Page 1
Digital video recorder user manual cbc v 0.1 intelligent security & fire.
Page 2: Table of Contents
Table of contents 1. Introduction 1-1 safety warning ………………………………………………………………………………… 3 1-2 features ………………………………………………………………………………………… 4 1-3 specifications …………………………………………………………………………………... 5 2. Installation 2-1 package contents ………………………………………………………………………………. 6 2-2 connection ………………………………………………………...
Page 3
1. Introduction we thank you for choosing this high quality digital video recorder. The dvr converts analog ntsc or pal video to digital images and records them on a removable hard disk drive. Digitally recorded video has several advantages over analog video recorded on tape. There is no need to adj...
Page 4
1.2 features 1.2.1 replace traditional time-lapse vcr. Compatible with most multiplexer and quad processors. 1.2.2 compatible with ntsc / pal 1.2.3 record speed options: ntsc : maximum 60 images / second, minimum 1 image / second pal : maximum 50 images / second, minimum 1 image / second 1.2. 4 reco...
Page 5
1.3 specifications video format ntsc / eia or pal / ccir hdd storage ide type, utma 66 above, 1 removable hdd supported record mode manual / alarm / external / timer playback searching date & time / event / alarm searching rs232 yes o.S.D. (on screen display) yes security password protection video i...
Page 6
2. Installation 2.1 package contents the package contents including the following items. Single channel digital video recorder hdd cartridge key for cartridge (in hdd cartridge) power cord user manual rack mounting kit 2.2 connection 2.2.1 connect with single camera alarm input video camera video in...
Page 7
2.2.2 connect with multiplexer alarm input gnd video camera . . . . 16 . . . . Vcr out dvr vcr in main monitor 2 1 rs232 alarm sensor pc video in video out 2.3 rs232 remote protocol you can use the pc key board to simulate dvr key pad. Data: remote protocol using 8 bit data 、 1 start bit 、 1stop bit...
Page 8
3.1.1 remove drive carrier from receiving frame by raise the inner rack handle, then slide carrier out 。 3.1.2 raise the handle, then bending the open clip to release the cover hook, to slide out top cover 。 3.1.2 function settings and operation 3.1.2.1 power indicator and hdd access indicator when ...
Page 9
Ips 60 30 15 8 4 2 1 best 12hr 24hr 48hr 90hr 180hr 360hr 720hr high 15hr 30hr 60hr 112.5hr 225hr 450hr 900hr normal 24hr 48hr 96hr 180hr 360hr 720hr 1440hr record quality basic 40hr 80hr 160hr 300hr 600hr 1200hr 2400hr hdd type 120gb pal system ips 50 25 12 6 3 2 1 best 12hr 24hr 50hr 101hr 203hr 3...
Page 10
Hdd hdd full timer alarm menu enter search slow rew ff pause stop play rec power 1. Install hdd this device comes with a removable hard disk drive tray. Before turning on this device, you must install hard disk drive (not including in standard (package), and make it ready to operate. 2. Menu press m...
Page 11
(1) hdd : hdd is activated (2) hdd full ： hdd is full (3) alarm ： when alarm enable : yes (when alarm is triggered, the led is flashing) (4) timer ： when timer enable : yes (5) play ： play operation (6) rec ： recording operation 3.3 back panel connection power video out video in alarm 1. Video in co...
Page 12
9 pin com port pin 1. Rs232-tx : rs-232 dvr can be controlled remotely by an external device or control system, such as a control keyboard, using rs-232 serial communications signals. Pin 2. Rs232-rx : rs-232 dvr can be controlled remotely by an external device or control system, such as a control k...
Page 13
“high” pin 4. Switch out connect to vcr trigger recording terminal of multiplexer, in order to synchronize recording signals. The default mode is falling (negative) edge. Pin 5. Error out when hdd errors happen, this pin will send a signal out. This pin become “low” when hdd errors happen. The norma...
Page 14
Reset both alarm output signal and dvr’s internal buzzer. When alarm has been triggered, signal becomes “low”, and it will stop all alarm activities. Under normal operation, signal remains “high”. Pin 14. Alarm input to connect wire from alarm input ( pin 14 ) to gnd ( pin 9 ) connector, dvr will st...
Page 15
To press ”menu” to enter main menu. You will need to enter password to access main menu. To press “ ◄ ” “ ► ” to move digit, and to press ” ▲ ” “ ▼ ” to select number. To press ”enter” button to confirm password. Ex.: password : 0000 (default : 0000) password : 0000 after keying in correct password,...
Page 16
On : buzzer on off : buzzer off 3.5.1.4 press menu to exit and confirm current operation. 3.5.1.5 press again menu to exit and close system setup mode. 3.5.2 hdd overwrite setup 3.5.2.1 press ” ▲ ” “ ▼ ” to choose hdd overwrite 3.5.2.2 press “ enter ” to confirm hdd overwrite. 3.5.2.3 press ” ▲ ” “ ...
Page 17
3.5.5.2 press “ enter ” to confirm system time: 22:38:29 setup. 3.5.5.3 press ” ▲ ” “ ▼ ” to choose number, and press “ ◄ ” “ ► ” to move digit location time: 22:38:29 hh:mm:ss; hour, minute, second 3.5.5.4 press menu to exit and confirm current operation. 3.5.5.5 press again menu to exit and close ...
Page 18
But date / time & password setup will not be changed. (system) ► buzzer : on hdd overwrite : no date display : y- m - d date : 2002-jul-14(sun) time : 22:38:29 new password : xxxx clear hdd : no. System reset : no. No : confirm not to system reset 3.5.8.4 press menu to exit and confirm current opera...
Page 19
Press ” ▲ ” “ ▼ ” to choose item. ► timer record alarm remote system event (menu) ► timer record alarm remote system event to choose timer item, and press “enter” button to confirm timer record setup mode. It will be shown as right screen (timer) day start end ips daily 00:00 00:00 off daily 00:00 0...
Page 20
Press ” ▲ ” “ ▼ ” to choose options of ntsc : 1,2, 4, 8, 15, 30, 60 / pal : 1,2, 3, 6, 12, 25, 50 / off: for not activated. * record quality : best / high / normal / basic according menu record setup. * record format : fields / frames according menu record setup. 3.6.2.6 press menu to confirm curren...
Page 21
Press ” ▲ ” “ ▼ ” to choose record item. Timer ► record alarm remote system event (menu) timer ► record alarm remote system event to choose record item, and press “enter” to enter record mode. It will be shown as right screen (record) ► record ips: 60 record quality: normal record mode: frame 3.7.2 ...
Page 22
3.8 alarm mode setup 3.8.1 enter “ alarm “ setup to press ”menu” to enter main menu. You will need to enter password to access main menu. To press “ ◄ ” “ ► ” to move digit, and to press ” ▲ ” “ ▼ ” to select number. To press ”enter” button to confirm password. Ex.: password : 0000 (default : 0000) ...
Page 23
Off: turn off alarm enable (alarm disable) 3.8.2.3 press menu to exit and confirm current operation. 3.8.2.4 press again menu to exit and close system setup mode. 3.8.3 alarm duration setup option: 3.8.3.1 press “ enter ” to confirm alarm duration setup. 3.8.3.2 press ” ▲ ” “ ▼ ”to choose alarm dura...
Page 24
To press ”menu” to enter main menu. You will need to enter password to access main menu. To press “ ◄ ” “ ► ” to move digit, and to press ” ▲ ” “ ▼ ” to select number. To press ”enter” button to confirm password. Ex.: password : 0000 (default : 0000) password : 0000 after keying in correct password,...
Page 25
3.9.2.3 press menu to exit and confirm current operation. 3.9.2.4 press again menu to exit and close system setup mode. 3.9.3 remote protocol transmitting baud rate setup 3.9.3.1 press “ enter ” to confirm baud rate setup. 3.9.3.2 press ” ▲ ” “ ▼ ” to choose the baud rate 115200 、 57600 、 19200 、 96...
Page 26
Press ” ▲ ” “ ▼ ” to choose event item. Timer record alarm remote system ► event (menu) timer record alarm remote system ► event press “ enter ” to confirm full list, and the screen will be as right displayed. Press ” ▲ ” “ ▼ ” to choose wanted recorded event (there will be shown only 8 list in one ...
Page 27
4. Operation 4.1 power on before turning power on make sure the hdd has been locked, and the power led is red color now. After pressing power button, power led will turn to orange color, then all other led light will turn to red color except the led for hdd. Osd screen will display “hdd detecting”, ...
Page 28
Start (rs232 pin 6), it will start recording. The recording speed and quality will be followed recording mode setup in main menu. The screen will be as right displayed. E : external trigger record : recording ow : hdd over write 32gb : if the ow location shows 32gb, it means that hdd left 32 gb capa...
Page 29
4.3 play press “play” then dvr will into the play mode, it will show the last record. 4.3.1 fast forward (f.F. ) & fast rewind (f.R.) 4.3.1.1 press “play” then press” ►► ” for fast forward searching screen. To press once ” ►► ” to get speed for 2x. To press twice “ ►► ” to get speed for 4x, ….And th...
Page 30
4.4 search 4.4.1 press “ search” to find recorded list last record - the last recorded video full list - recorded video full list sorting by time alarm list - alarm recorded list sorting by time time search - find indicated time for recorded video ► last record full list alarm list time search 4.4.2...
Page 31
4.4.4 recorded video in alarm list press ” ▲ ” “ ▼ ” to choose alarm list. Screen will be as right displayed. Last record full list ► alarm list time search press “ enter ” to confirm full list, and the screen will be as right displayed. Press ” ▲ ” “ ▼ ” to choose wanted recorded event (there will ...
Page 32
5. Trouble shouting & appendix 5.1 trouble shouting what dvr appears a malfunction, it may be not serious and can be corrected. The table below describes some typical problems and their remedies. Check them before calling your dvr dealer: problem remedy no power check power source cord connections. ...
Page 33
5.2 compatible multiplexer brands (appendix a) manufacturer model system test result av tech avc707n ntsc ok av tech avc707p pal ok av tech avc706n ntsc ok av tech avc706p pal ok atv dpx16 ntsc ok capture cpt-cd16 pal ok dedicated micros sldx9c ntsc ok dedicated micros sldx16c pal ok pelco mx4016 nt...
Page 34
5.3 compatible hdd brands (appendix b) manufacturer model capacity rotation ibm deskstar 120gxp (40gb) 40gb 7200 rpm ibm deskstar 60gxp ic35l060 60gb 7200 rpm ibm deskstar 120gxp (80gb) 80gb 7200 rpm ibm deskstar 120gxp (120gb) 120gb 7200 rpm maxtor diamondmax 536dx(60gb) 4w060h4 60gb 5400 rpm seaga...