Ganz DAY/NIGHT VANDAL DOME CAMERA Instruction Manual

Summary of DAY/NIGHT VANDAL DOME CAMERA

  • Page 1

    Day/night vandal dome camera about this manual dimensions : mm ■ connections instruction manual before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. Troubleshooting before sending the camera out for repair, check the items below. If...

  • Page 2

    ■ lens adjustments ■ camera settings ● osd switch function 1. Adjust the panning(360 ˚) and tilt(70˚) position. 2. Setting the zoom position by using zoom lever screw. 3. Setting the focus by using focus lever screw. Connections and camera settings setup funtion summary when using built-in lens, the...

  • Page 3

    Specification installation 1 use the supplied l-wrench to remove the four fixing screws (b) of dome cover (a). 2 align the camera unit with the surface of the ceiling, make marks on the ceiling in the places where the screw holes are to be drilled, and then drill the four holes. 3 cut a hole (diamet...

  • Page 4

    Setup funtion summary when using built-in lens, the type of the lens is able to fix shutter esc, manual, flk manual: 1/60(50) ~ 1/120,000sec white bal. Atw, awc, manual atw: 1,800 ~10,500 ˚k backlight off, low, middle, high backlight compensation agc off, normal, high the brightness can be adjusted(...