1. DL manuals
  2. Ganz
  3. DVR
  4. DR16HV
  5. Instruction Manual

Ganz DR16HV Instruction Manual

Manual is about: DIGIMASTER Series 8CH/16CH Digital Video Recorder

Summary of DR16HV

  • Page 1

    1.

  • Page 2

    2 s p e c i f i c a t i o n & o r g a n i z a t i o n - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 2 d e v i c e s p e c i f i c a t i o n s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ...

  • Page 3

    3 s y s t e m - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 5 d a t e / t i m e - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 5 s y s t e m m a n a g e m ...

  • Page 4

    4 s o u n d - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 9 s y s t e m - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ...

  • Page 5

    5 thank you for purchasing the ganz digimaster digital video recorder (dvr). This dvr is produced using the most advanced ganz digital recording technology and its quality is guaranteed by strict reliability and compatibility testing. This manual provides necessary information for the correct use of...

  • Page 6

    6 all copyrights of this manual are reserved by cbc (america) corp., cbc group, and cbc co., ltd. Copyright © 2010 any reproduction or republishing of this manual for commercial purposes is prohibited. It is prohibited to transfer this manual via online media such as, but not limited to, the interne...

  • Page 7

    7 the following are warnings and precautions to ensure user safety and prevention of property damage. Please read the information below thoroughly..

  • Page 8

    8.

  • Page 9

    9.

  • Page 10

    10

  • Page 11

    11 important safety instructions 1) read all instructions contained in this manual. 2) keep a copy of these instructions for future reference. 3) read all warnings. 4) follow all instructions. 5) do not use this apparatus near water. 6) clean only with a dry cloth. 7) do not block any of the ventila...

  • Page 12

    12 specifications & organization 1. Device specifications video standard ntsc/pal audio bi-directional audio monitor display real time: 30ips (ntsc) or 25ips (pal), per camera covert camera operation programmable event/log search up to 1,000,000 event log entries for user login/out, configuration ch...

  • Page 13

    13 specifications & organization 1. Device specifications (cont’d) pre-alarm recording up to 5 seconds, programmable per camera osd languages english, spanish, portuguese, french, russian, polish, german, italian ethernet/lan network interface 10/100-base-tx, rj-45 remote function live view, search,...

  • Page 14

    14 specifications & organization 2. Product contents list please check to make sure that all of the product contents are present after opening the product packaging. Remote controller instruction manual installation cd ac power cable ② optional contents internal hard disk drive dr8/16hl unit 12v dc ...

  • Page 15

    15 specifications & organization 3. System organization vga monitor.

  • Page 16: Product Description

    16 product description 1. Front panel description. Power: turn on/off the system power. Display: selects various display modes in live display and playback. Search: displays the search menu. Menu: displays the setup menus. Navigation keys: use for navigating on menu or control ptz. Return: cancel or...

  • Page 17: Product Description

    17 product description 2. Rear panel description. A. Camera input: connect up to 8 /16 camera inputs. B . Vga: vga main monitor connection to a pc monitor or plasma screen. A c . Audio inputs & outputs: up to 4 audio inputs and one audio output can be connected as necessary. D . Pal / ntsc : change ...

  • Page 18

    18 s s y y s s t t e e m m c c o o n n f f i i g g u u r r e e – – r r e e m m o o t t e e c c o o n n t t r r o o l l l l e e r r 3. Remote controller description. ※ if there are many dvrs on stack, each dvr must be set with different id, the remote controller sets each id per dvr, then all dvrs ca...

  • Page 19

    19 c c o o n n n n e e c c t t & & p p o o w w e e r r o o n n • connect up to 16 camera inputs as necessary. • connect one or more monitors to the dvr using the composite , vga connections. • connect power to the dvr, using the provided ac power cord or dc 12v power adapter (depending on model). Th...

  • Page 20

    20 l l i i v v e e d d i i s s p p l l a a y y menu control all menus can be controlled from this ‘status bar’ with either the usb mouse or front panel buttons. Screen division select the ‘ display ’ button and the screen division menu will appear. Select the screen type. Sequence mode (user can sel...

  • Page 21

    21 l l i i v v e e d d i i s s p p l l a a y y ptz 1) cam: select the channel of the ptz device which you are controlling. 2) preset: select the number of the preset you are working with (1 ~ 254). 3) set: sets the current ptz position as the selected preset number. 4) goto: tells the ptz device to ...

  • Page 22

    22 l l i i v v e e d d i i s s p p l l a a y y log search user can see a live event log window, which shows each new event as it occurs. Panic recording - this function button is used to toggle the panic recording mode on/off. - when panic recording mode is enabled, you will see a red recording icon...

  • Page 23

    23 l l i i v v e e d d i i s s p p l l a a y y quick menu you may access the ‘quick menu’ by right-clicking on any channel which you would like to control. 1. Freeze on/off: user can freeze the live display of any channel. While the other channels will continue to show live view video, the frozen ch...

  • Page 24: System Setup

    24 system setup click the ‘ menu ’ button and choose the ‘ system setup ’ menu. - to navigate around any items in the setup menu, use the cursor keys and the ‘ enter ’ and ‘ return ’ buttons. - in general, the ‘ enter ’ button is used to select a particular field to edit, and then is pressed again t...

  • Page 25: System Setup

    25 system setup camera from the ‘ system setup ’ menu, click on the ‘ camera ’ submenu. Camera: camera setup left-click on the camera setup menu. Double-click on the ‘title’ field to change the camera name. Click the ‘covert’ or ‘audio’ fields for the desired channel. Then, use the button to modify ...

  • Page 26: System Setup

    26 system setup modify each value using the button. The selected channel is displayed in full screen mode. Brightness, contrast, tint and color can be changed as necessary. To modify a different channel, highlight the camera field, and choose the desired channel. Press return when all changes are co...

  • Page 27: System Setup

    27 system setup advanced ptz properties can be adjusted for each channel using the ‘ detail ’ button. Some settings, such as auto focus, may not be compatible with all ptz devices. If this is the case, changing this value will have no effect on ptz control..

  • Page 28: System Setup

    28 system setup camera : motion sensor click on the motion sensor menu. Click on a sensitivity value for the desired channel. Then use the button to increase or decrease the sensitivity. Sensitivity : determines the degree of motion required before recording is activated. (1: least sensitive to moti...

  • Page 29: System Setup

    29 system setup display from the ‘ system setup ’ menu, click on the ‘ display ’ submenu. Display - osd click on the ‘ osd ’ submenu and then click on any field. Then, click on the button to modify the value. Status bar timeout : toggles the status bar at the bottom of screen in live view mode on / ...

  • Page 30: System Setup

    30 system setup display - monitor click the monitor menu, then click on any field. Use the button to modify the value. Sequence dwell : the amount of time that each screen is displayed in a sequence. Spot-out dwell : the amount of time that each screen is displayed on each of the spot monitor output...

  • Page 31: System Setup

    31 system setup display - sequence click the ‘ sequence ’ menu. - when the ‘ seq ’ button is pressed, the default sequence will cycle through all 16 channels, one by one, in full screen. - sequence setup allows the user to define a custom sequence pattern, using either full screen or mixed multi-scr...

  • Page 32: System Setup

    32 system setup click ‘ add ’. The “sequence setup” submenu appears. - determine the screen division mode under the “view type” section. - assign the desired channel under the “configure” section. - when all sequence settings have been entered correctly, click ‘ confirm ’. - to add an additional mod...

  • Page 33: System Setup

    33 system setup display – spot out click on the ‘ spot-out ’ menu. Each dvr has up to 1 spot monitor output . Spot monitor displays a full screen sequence of particular channels, depending on the settings within this menu. For spot monitor, the operator can decide which channels are to be displayed ...

  • Page 34: System Setup

    34 system setup sound from the ‘ system setup ’ menu, click on the ‘ sound ’ menu. Sound - audio click on the ‘audio ’ menu, and click on any field. Use the button to modify each value. Live audio : when enabled, the selected audio channel can be monitored from the audio output. Default audio channe...

  • Page 35: System Setup

    35 system setup system from the ‘ system setup ’ menu, click the system menu. System - date / time click the date / time menu, and click on any field. Use the button to modify any value. Date time : allows the operator to set or modify the current system date & time. Date format : determines the for...

  • Page 36: System Setup

    36 system setup system-system management click on the ‘ system management ’ menu. F/w version: shows the current firmware version of the dvr. H/w version: shows the hardware version of the dvr. Video signal type: the dvr automatically switches between pal and ntsc depending on the video format of th...

  • Page 37: System Setup

    37 system setup f/w update : firmware updates may be released periodically to enhance system performance and add extra features. The user can upgrade the dvr firmware locally, using a usb memory stick. Select the device where the firmware update files are located. After selecting the f/w version fro...

  • Page 38: System Setup

    38 system setup user from the ‘ system setup ’ menu, click on the ‘ user ’ menu. User - user management by default, the dvr is configured with a user id of ‘ admin ’, belonging to the admin group, with a password of ‘ 1234 ’. Within this menu, you have the ability to add new users, or modify the det...

  • Page 39: System Setup

    39 system setup user - user authority user can configure the specific authority and permissions for the manager and user groups. To confirm changes, click the ‘ apply ’ button after selecting each of the desired items. Note: any user can be deleted except the default ‘ admin ’ user account. User - l...

  • Page 40: System Setup

    40 system setup network from the ‘ system setup ’ menu, click on the ‘ network ’ menu. Network- ip setup click on the ‘ ip setup ’ menu. Dhcp : when enabled, the dvr will obtain an ip address automatically from a router or dhcp server, upon reboot. Web service : when enabled, allows remote connectio...

  • Page 41: System Setup

    41 system setup network-ddns ddns : when enabled, the dvr can be accessed through a dynamic dns server. (this is commonly used if a particular broadband connection does not have a static ip address.) caution: to use the ddns function, the user must configure port forwarding. A. Default web service p...

  • Page 42: System Setup

    42 system setup event / sensor from the ‘ system setup ’ menu, click on the ‘ event / sensor ’ menu. Event / sensor - hdd event click on the ‘ hdd event ’ menu, and choose any field. . Use the button to modify the value. The dvr will continually monitor the health of the hard drives in the system an...

  • Page 43: System Setup

    43 system setup event / sensor - alarm out click on the alarm output menu, and click on a field. Use the button to modify the value. This menu will determine the behavior and actions that will trigger each of the 1 alarm output. Behavior settings alarm out : choose which alarm output to configure. O...

  • Page 44: System Setup

    44 system setup event / sensor - buzzer out click on the buzzer output menu, and click on a field. Use the button to modify the value. This menu will determine the behavior and actions that will trigger the internal buzzer. Behavior settings operation : the internal buzzer can be enabled or disabled...

  • Page 45: System Setup

    45 system setup event / sensor - e-mail notification click on the email notification menu, and click on a field. Use the button to modify the value. This menu will determine the behavior and actions that will send an e-mail notification to a remote user. Behavior settings notification : e-mail notif...

  • Page 46: System Setup

    46 system setup disk management click on the disk management menu. To manage the internal hard drives, from the ‘ system setup ’ menu, highlight ‘ disk manage ’ and press enter . Record time limit: in certain circumstances, it may be necessary to limit the amount of footage stored. On the dvr (to co...

  • Page 47: Record Setup

    47 record setup from the main menu, click on the ‘ record ’ menu. To configure the recording behavior of the dvr, highlight ‘ record menu ’ and press ‘ enter ’. Recording operations click on the ‘ recording operations ’ menu. Click on any field, and use the button to modify the value. Schedule mode ...

  • Page 48: Record Setup

    48 record setup continuous / motion recording setup click on the ‘ continuous / motion recording ’ menu. This menu allows the operator to configure continuous and motion-activated recording, based on a schedule. There are 2 sections to this menu: size / fps / quality: recording settings for each cha...

  • Page 49: Record Setup

    49 record setup size / fps / quality (continued) click on the timeline to select a block of time. Press ‘ enter ’ to display the green cursor. The green cursor square shown represents one hour. (in this case between 00:00 and 01:00). The table below the time bar shows the recording settings for this...

  • Page 50: Record Setup

    50 record setup size / fps / quality (continued) click on the size , fps , quality or audio fields. Use the button to modify the value. Press enter . Recording settings for the selected time period are displayed. Size : recording resolutions of cif (352x240), 2cif (704x240) or d1 (704x480) can be se...

  • Page 51: Record Setup

    51 record setup schedule click on the ‘ activation ’ menu. To change ‘ activation ’ settings, highlight ‘ continuous / motion recording ’ and press ‘ enter ’. Use the cursor keys to highlight ‘ activation ’ and press ‘ enter ’. The schedule box is highlighted in green. Press ‘ enter ’ to display the...

  • Page 52: Record Setup

    52 record setup alarm recording setup click on the ‘ alarm recording ’ submenu. The layout of this menu is very similar to the ‘ continuous / motion recording ’ menu. This menu screen allows the user to configure alarm-activated recording. There are 2 sections to this menu: size / fps / quality: rec...

  • Page 53: Record Setup

    53 record setup record: network streaming setup click the network streaming menu. Select the size, fps, quality and audio. During network streaming mode, the dvr is possible to set remotely uploaded video, audio stream with using client program like web ra. Maximum recording frame rate is 120fps at ...

  • Page 54: Search

    54 search to search for a particular section of recorded footage, click or press the ‘ search ’ button. To protect unauthorized viewing of footage, only admin and manager user groups can playback footage (by default). To login as admin , enter the default password of ‘ 1234 ’ and press ‘ enter ’. Se...

  • Page 55: Search

    55 search click and drag the time bar across the timeline. Press enter to select the calendar and use the cursor keys to move the purple square to the desired day. As different days are selected, the timeline display also changes to show the timeline of recorded footage for that day. Press enter to ...

  • Page 56: Search

    56 search during playback, user can put a bookmark on the recorded data that needs to be archived later. Click the button at the time the archive is to be started. Then playback will halt and menu below will appear. After inputting the “tag” name, press start . Then the system will return to playbac...

  • Page 57: Search

    57 search to exit playback mode and return to the search screen in order to choose another time and date, press ‘ return ’. To exit the search screen and return to live view mode, repeatedly press the ‘ return ’ button. Search – search by event the dvr event log stores events such as motion and alar...

  • Page 58: Search

    58 search click the ‘ search ’ button to search for events. . Highlight ‘ search ’ and press ‘ enter ’ to display the event log for the criteria selected. To playback footage for a particular event, select the event from the list using the cursor keys and press ‘ enter ’. Playback resumes from the m...

  • Page 59: Archiving

    59 archiving to archive recorded footage to a usb memory stick, press the archive button. To protect unauthorized viewing and distribution of footage, only the admin user level can archive footage (by default). To login as admin , enter the default password of ‘ 1234 ’ and press ‘ enter ’. Create a ...

  • Page 60: Archiving

    60 archiving reserved data management avi archiving list : user can see the list of data that has been reserved from the ‘ create new archive ’ menu information : the detailed information of each clip that has been reserved. Delete : delete the selected clip from the list of reserved data. Burn : pe...

  • Page 61

    61 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p preliminary before connecting when configuring for a web or remote connection to the dvr, ports 554 and 8080 should be forwarded within the router. Refer to the user’s manual of your specific model of router for information o...

  • Page 62

    62 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p the default user id and password are ‘ admin ’ & ’ 1234 ’, respectively. User will need to install the activex control, click run add-on. In case of not being able to install activex, the user needs to enable activex within t...

  • Page 63

    63 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p live mode icons and corresponding functions within live mode: - select live view screen division (1, 4, 8, 9, 16-channel modes) - sequence mode - move to next camera - full screen - select live view channel manually . - activ...

  • Page 64

    64 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p - status : shows active status indicators of all channels on the dvr. 1. Alarm - indicator will be marked when system detects alarm input. 2. Motion - indicator will be marked when system detects motion. 3. Video loss - indic...

  • Page 65

    65 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p 1. Pattern – move a camera to a sequence of several preset camera positions in order. 2. Preset – set a position of the camera to be recalled later. 3. Swing – move a camera between two or more preset points. Search by time -...

  • Page 66

    66 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p search by event 1. Event : select the types of events to search for within the recorded data. 2. Period : set the date/time range to search for events within the recorded data. 3. Search : begin query, and list all events fou...

  • Page 67

    67 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p remote setup 1. Camera : user can configure all camera attributes, such as title, covert channel, ptz, or motion. - motion area setup for individually configuring motion areas and sensitivity..

  • Page 68

    68 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p 1. Camera (continued) 1) select the ‘ motion ’ submenu. 2) select a channel and the motion sensitivity level. 3) click and drag the mouse across the image grid to select motion areas. 4) click ok. 2. Display 1) osd - configur...

  • Page 69

    69 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p 3. Sound 1) audio setting - enable live audio, and select a live audio channel. 2) buzzer setting - activate dvr internal buzzer, based on keypress. 4. System configure date and time formats, ntp time server, time zone and ds...

  • Page 70

    70 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p 6. User add new users, configure existing users, authority level and log out time. 7. Network user can check the dvr network information and adjust the network bandwidth throttle. All other ip settings are not allowed to be c...

  • Page 71

    71 w w e e b b c c o o n n n n e e c c t t i i o o n n s s e e t t u u p p 8. Sensor configure all options for alarm input, alarm output, buzzer out, and e-mail notification. The menu structure is very similar to the local dvr system setup for event / sensor. Information - displays the dvr model and...

  • Page 72

    72 w w a a t t e e r r m m a a r r k k p p r r o o c c e e s s s s 1. Open the archive data, and run the file [bplayer.Exe], which is included within the backup folder. 2. Click the [open file] button and choose the backup file you wish to open and verify..

  • Page 73

    73 w w a a t t e e r r m m a a r r k k p p r r o o c c e e s s s s 3. After selecting the file, you will be asked to confirm whether or not you would like to check the watermark. 4. Click the [yes] button to verify the embedded watermark. 5. If the archived avi file has been modified, a [verificatio...

  • Page 74

    74 s s m m a a r r t t p p h h o o n n e e c c o o n n n n e e c c t t i i o o n n • iphone 1. Select the safari browser. 2. Enter the ip address or url to connect. Click the [go] button. 3. Enter the user id and password. (default: admin / 1234 ).

  • Page 75

    75 s s m m a a r r t t p p h h o o n n e e c c o o n n n n e e c c t t i i o o n n • blackberry 1. Select the web browser. 2. Enter the ip address or url to connect, and press the enter button. 3. Enter the user id and password. (default: admin / 1234 ).

  • Page 76

    76.

  • Page 77

    77.

  • Page 78

    78.