Ganz YCH-03Am Instruction manual

Summary of YCH-03Am

  • Page 2: Safety Precautions

    Eg-2 the installation should be made by a qualified service person and should conform to all local codes. Safety precautions product features contents thank you for your purchase of this product. Before operating this product, please read this instruction manual carefully. After you have read this m...

  • Page 3: External Dimensions

    Eg-3 2 locations with high levels of humidity or dust (storage humidity range: max. 95% rh (no condensation) ) 3 locations where there are large amounts of water vapor or steam 4 locations with excessive vibrations (3) if this camera is used near wireless communication devices or other equipment tha...

  • Page 4: Part Names and Functions

    Eg-4 4 mist mode switch std : standard setting for mist. The preset conditions are applied to on/off control and correction effects of the mist function. Auto: select this mode when image contrast is over-corrected in “std” of the mist mode. Under normal conditions, auto does not function at all or ...

  • Page 5

    Eg-5 ÌÃ ÏÆÆ when using “auto” of the mist mode, be sure to switch the mode from “auto” to “std” and then back to “auto” after setting up the camera. This is required to reset the data accumulated during the setup process. When using “auto” of the mist mode, fi x the camera setting direction. The “au...

  • Page 6

    Eg-6 : when connecting the auto- iris lens, turn off the camera power. Also, if the auto-iris mode switch is set to a mode other than “dc” or “video” that is set for the connecting lens, the lens may be damaged. Dc : to be set when using a non-amp auto-iris lens. Aes : to be set when using fi xed ir...

  • Page 7: Troubleshooting

    Eg-7 troubleshooting camera mounting top attachment bottom attachment moving the tripod set base plate the camera can be attached to a tripod, fi xer or other mounting device from either the top or bottom side by using the mounting screw holes (1/4-inch, 20 unc) of the tripod set base plate. The tri...

  • Page 8: Specifications

    Eg-8 specifications model no. Ych-03am d d/n (digital day & night) zc-nh258nm m d/n (mechanical day & night) tv system ntsc scanning system 2:1 interlace image sensor 1/3-type interline transfer ccd effective elements 768 (h) × 494 (v) scanning frequency 15.734khz (h) / 59.94hz (v) video output 1.0 ...