Ganz ZA-NVE12K series Hardware Manual

Manual is about: 1u 12ch rack for ganz encoder series

Summary of ZA-NVE12K series

  • Page 2: Table Of Contents

    Table of contents safety and regulatory information..................................................................................................... 3 1. Introduction.....................................................................................................................................

  • Page 3

    Za-nve12k hardware manual 2010/2-1 e 3 safety and regulatory information warning : to prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the ...

  • Page 4

    Za-nve12k hardware manual 2010/2-1 e 4 ce compliance this is a class product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures..

  • Page 5

    Za-nve12k hardware manual 2010/2-1 e 5 1. Introduction za-nve12k compress video/audio data and transmit the compressed video/audio data through the network in real time. Ganz encoder provides a high quality video image with a limited bandwidth and storage capacity. These products are ideally suited ...

  • Page 6

    Za-nve12k hardware manual 2010/2-1 e 6 2. Subrack 2.1. Specifications za-nve12k and zn-rs4000ae series specification is shown as following parameter value construction aluminum, 19” / 1u sub-rack applied device zn-rs4000ae series available slots 3 ea (hot swappable blades) input 90 ~ 264vac , 47 ~ 6...

  • Page 7

    Za-nve12k hardware manual 2010/2-1 e 7 2.2. Unit view figure 1. Ganz encoder subrack.

  • Page 8

    Za-nve12k hardware manual 2010/2-1 e 8 figure 2. Rear, top and front view of subrack figure 3. Detailed rear view of subrack (video, audio, digital input/output, etc.) rx tx rs-232 2 c 1 2 3 3 4 1 2 4 1 c aout di do ain 1 io rs-485 reserved ethernet 3 usb 3 io3 vin3-1 vin3-2 vin3-3 vin3-4 rs-232.

  • Page 9

    Za-nve12k hardware manual 2010/2-1 e 9 figure 4. Detailed rear view of subrack (power cord) figure 5. Detailed rear view of subrack (rack id) figure 6. Leftside and rightside view of subrack on 1 2 3 4 0 i.

  • Page 10

    Za-nve12k hardware manual 2010/2-1 e 10 2.3. Mechanical characteristics mechanical characteristics of subrack : z dimension width (inch): 19 " height (u): 1 u depth (mm): 286.1mm.

  • Page 11

    Za-nve12k hardware manual 2010/2-1 e 11 3. Ganz encoder blade 3.1. Specifications zn-rs4000ae series 4ch mpeg-4 100/120fps@d1 single mode dual mode input channel 4ch 2ch output channel 1 quad 2 loop out compression mpeg-4, mjpeg selectable per channel resolution d1, 2cif, cif, qcif v ideo compressio...

  • Page 12

    Za-nve12k hardware manual 2010/2-1 e 12 3.2. Unit view figure 7. Ganz encoder blade figure 8. Front, top, side view of a blade.

  • Page 13

    Za-nve12k hardware manual 2010/2-1 e 13 3.3. Mechanical characteristics mechanical characteristics of a blade: z dimension (unit: mm): 30.1 (w) x 128.4 (h) x 220 (d) 3.4. Ejecting and inserting blades ejecting a blade 1. Unscrew two screws. 2. Remove the blade from the rack as figure 9. Figure 9. Ej...

  • Page 14

    Za-nve12k hardware manual 2010/2-1 e 14 mac address = 00-1c-b8-c0-14-b1 → ip address = 192.168.35.69 factory default (fd) initialization procedure is as follows: 1. Turn on the power. 2. Press “reset” button when status led starts blinking rapidly. 3. Release “reset” button when status led blinks sl...

  • Page 15

    Za-nve12k hardware manual 2010/2-1 e 15 4. Power supplier unit 4.1. Specifications z dc power supplier unit (psu) z 19" 1u rack mountable, 10hp, dc12v, 74.4w 4.2. Unit view figure 10. Power supplier unit.

  • Page 16

    Za-nve12k hardware manual 2010/2-1 e 16 4.3. Electrical characteristics dc voltage 12v rated current 6.2a current range 0 ~ 6.8a rated power 74.4w peak load(10sec.) note.4 81.6w ripple & noise (max.) note.2 80mvp-p voltage adj. Range 3 ~3.5v voltage tolerance note.3 3.00% line regulation 1.00% load ...

  • Page 17

    Za-nve12k hardware manual 2010/2-1 e 17 - note – 1. All parameters not specially mentioned are measured at 230vac input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. ...

  • Page 18

    Za-nve12k hardware manual 2010/2-1 e 18 figure 11. Front and top view of psu.

  • Page 19

    Za-nve12k hardware manual 2010/2-1 e 19 5. Fan unit 5.1. Description z 19” 1u rack fixed fan unit z number of dc fans (ea): 2 5.2. Unit view figure 12. Fan unit 5.3. Electrical characteristics parameter units value rated voltage dc 12 input voltage operating voltage v dc 10.2 ~ 13.8 input power w 1....

  • Page 20

    Za-nve12k hardware manual 2010/2-1 e 20 5.4. Environmental characteristics parameter value operating -10 ° c ~ +70 ° c allowable ambient temperature range storage -40 ° c ~ +70 ° c table 7. Environmental specification of fan unit 5.5. Mechanical characteristics casing/ impeller plastic (black) 94v-0...