Summary of ZA-NVE40K
Page 2: Table Of Contents
Za-nve40k hardware manual 2010/2-1 d 2 table of contents safety and regulatory information..................................................................................................... 3 1. Introduction..............................................................................................
Page 3
Za-nve40k hardware manual 2010/2-1 d 3 safety and regulatory information warning: to prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the a...
Page 4
Za-nve40k hardware manual 2010/2-1 d 4 ce compliance this is a class product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures..
Page 5
Za-nve40k hardware manual 2010/2-1 d 5 1. Introduction za-nve40k compress video/audio data and transmit the compressed video/audio data through the network in real time. Ganz encoder provides a high quality video image with a limited bandwidth and storage capacity. These products are ideally suited ...
Page 6
Za-nve40k hardware manual 2010/2-1 d 6 2. Subrack 2.1. Specifications za-nve40k and zn-rs4000ae series specification is shown as following construction aluminum, 19” / 4u sub-rack applied device zn-rs4000ae series available slots 10 ea (hot swappable blades) input 85 ~ 264 vac, 47~63hz, 2a power typ...
Page 7
Za-nve40k hardware manual 2010/2-1 d 7 2.3. Unit view figure 1. Ganz encoder subrack.
Page 8
Za-nve40k hardware manual 2010/2-1 d 8 figure 2. Front, rear, top and bottom view of subrack ethernet 10 usb 10 vin 10-1 vin 10-2 vin 10-3 vin 10-4 1 2 c 1 2 3 3 4 1 2 4 1 c io io10 rx tx di do rs-485 ain aout rs-232 reserved figure 3. Detailed rear view of subrack (video, audio, digital input/outpu...
Page 9
Za-nve40k hardware manual 2010/2-1 d 9 figure 4. Detailed rear view of subrack (power cord) on 1 23456 78 rack id figure 5. Detailed rear view of subrack (rack id) 2.4. Mechanical characteristics mechanical characteristics of subrack: z dimension width (inch): 19 " height (u): 4 u depth (mm): ...
Page 10
Za-nve40k hardware manual 2010/2-1 d 10 3. Nve blade 3.1. Specifications zn-rs4000ae series 4ch mpeg-4 100/120fps@d1 single mode dual mode input channel 4ch 2ch output channel 1 quad 2 loop out compression mpeg-4, mjpeg selectable per channel resolution d1, 2cif, cif, qcif v ideo compression fps 100...
Page 11
Za-nve40k hardware manual 2010/2-1 d 11 figure 6. Blade figure 7. Front, top, side view of a blade 3.3. Mechanical characteristics mechanical characteristics of a blade: z dimension (unit: mm): 30.1 (w) x 128.4 (h) x 220 (d) 3.4. Ejecting and inserting blades ejecting a blade.
Page 12
Za-nve40k hardware manual 2010/2-1 d 12 1. Unscrew four collar screws. 2. Grasp the inject/eject handle of the blade and push it down as shown in below figure. 3. Remove the blade from the rack. Figure 8. Ejecting a blade inserting a blade 1. Make sure that the inject handle is in the outward positi...
Page 13
Za-nve40k hardware manual 2010/2-1 d 13 3.6. Rebooting reset can be carried out as follows: 1. Press reset for 1 second. When reset function is activated, status led and network led will blink together, twice. User may stop pressing reset at this point. 2. When “reset” function has been completed, l...
Page 14
Za-nve40k hardware manual 2010/2-1 d 14 4. Power supplier unit 4.1. Specifications z ac/dc switched mode power supplier unit (psu) z 19" 3u rack mountable, 10hp, dc12v, 150w 4.2. Unit view figure 9. Power supplier unit.
Page 15
Za-nve40k hardware manual 2010/2-1 d 15 4.3. Electrical characteristics specification for only power supply parameter units value nominal output voltage v 12 maximum output current a 13 maximum output power w 156 100v ac % 83 efficiency(typical) (*1) 200v ac % 86 input voltage range (*2) - 85~265vac...
Page 16
Za-nve40k hardware manual 2010/2-1 d 16 4.4. Environmental characteristics parameter units value operating temperature (*1) - -10~+60℃ (-10~+40℃:100%, +50℃:60%, +60℃:20%) operating humidity - 30~90%rh (no dewdrop) storage temperature - -30~+85℃ storage humidity - 10~95%rh (no dewdrop) - note - *1. L...
Page 17
Za-nve40k hardware manual 2010/2-1 d 17 4.6. Pin description z mating connector: din61412-h15 female figure 11. Pin connection of psu pin # signal name 4 6 output +12v dc output 8 sense +v 10 sense 0v assorted signal 12 14 output 0v dc output 16 nc 18 nc 20 nc 22 nc 24 nc 26 nc 28 ac line 30 ac neut...
Page 18
Za-nve40k hardware manual 2010/2-1 d 18 4.7. Ejecting and inserting psu ejecting a psu 1. Unscrew four collar screws. 2. Grasp the inject/eject handle of the psu and push it down as shown in below figure. 3. Remove the psu from the rack. Figure 12. Ejecting a psu inserting a psu 1. Make sure that th...
Page 19
Za-nve40k hardware manual 2010/2-1 d 19 5. Fan unit 5.1. Description z 19” 1u rack mountable fan unit z 3 dc fans 5.2. Unit view figure 13. Fan unit name remarks status led fan on & off dc status lamp in power switch dc inlet dc power input terminal dc outlet dc power output terminal.
Page 20
Za-nve40k hardware manual 2010/2-1 d 20 figure 14. Fan unit 5.3. Electrical characteristics parameter units value rated voltage dc 12 input voltage operating voltage v dc 6 ~ 13.8 input power w 3.60 maximum air flow m3/min 0.63 x 3ea = 1.89 (at average value in free air) fan speed min-1 1800 5.4. En...
Page 21
Za-nve40k hardware manual 2010/2-1 d 21 mechanical characteristics of fan unit: z dimension width (inch): 19 " height (u): 1 u depth (mm): 270 mm z number of dc fans (ea): 3.