(us)zc-d5000ntsc_0830.Indd 1 2006/08/30 15:18:14.
Eg-2 (2) to prevent fire or electrical shock, ul listed class 2 wiring should be used for the 12v dc or 24v ac input terminal. (3) be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and / or damage to the video camera. (4) do not attempt to aim the camera...
Eg-3 n : focus adjustment lever w t : view angle adjustment lever accessories exterior parts description camera body interior dc iris adjustment volume lens video output connector for service monitor cable service monitor cable adapter ring removing and attaching the cover dome cover to remove : pul...
Eg-4 attaching the unit you can use the following three methods to attach the unit. Please use the method that best fits the conditions of the area in which you want to install the unit. Attaching to the surface of the ceiling or wall use this method to attach the unit to the surface of the ceiling o...
Eg-5 running cables on the exterior surface of the ceiling or wall to run cables on the exterior surface of the ceiling or wall, use the following procedure to attach the camera body. Remove the surface mount cover from the camera body. Remove the marked area on rear surface of the camera body and t...
Eg-6 1 2 3 attaching to a 4s junction box be sure to use the adapter ring to attach the camera body when embedding it in the 4s junction box. Attaching the adapter ring attach the adapter ring to the 4s junction box. ● please use screws that are suitable for the 4s junction box. Attention ● do not t...
Eg-7 connecting the cables connect the power and video cables. Connect the video cable from the monitor and the coaxial video cable attached to the camera body. Connect the power cable. ● when using 12v dc, connect the positive (+) terminal to the terminal marked "+12vdc". 12v dc connection 24v ac c...
Eg-8 when you have finished adjusting the direction of the lens, tighten the locking screw with a screwdriver. Attaching the service monitor use the service monitor cable to check and adjust camera direction, focus, and angle on a service monitor. Adjusting the camera direction the camera body is set...
Eg-9 adjusting the line phase (when using an ac24v 60hz power source in the line lock mode) use an ac power-source synchronization phase adjustment volume to adjust the phase of power synchronization. (the default position for the adjuster is fully turned to the left.) adjusting the dc iris level ad...
Eg-10 installation and adjustment complete attach the body cover. Turn the inner cover to match the position of the slit and lens. Attach the dome cover. Setting the d d/n (digital day/night) switch this function digitally processes the image from the camera to provide a bright picture even in very ...
Eg-11 specifications * the specifications and/or appearance of the product may change without a prior notice. Model no. Zc-d5029nha zc-d5212nha zc-d5550nha high resolution focal length 2.9 mm - 8.2 mm 2.8 mm - 12 mm 5.0 mm - 50 mm max. Aperture ratio 1:1.0 1:1.3 1: 1.3 iris f1.0 - f360c (dc auto iris...
096-1.0 (us)zc-d5000ntsc_0830.Indd 12 2006/08/30 15:18:24.
