Ganz ZC-D7000 SERIES Instruction Manual

Summary of ZC-D7000 SERIES

  • Page 1

    (us)zc-d7312ntsc.Indd 1 (us)zc-d7312ntsc.Indd 1 2009/04/09 14:08:42 2009/04/09 14:08:42.

  • Page 2

    Eg-2 thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future reference. To prevent fi re or electric shock, do not expose this product...

  • Page 3

    Eg-3 parts description lens video output connector inner cover camera body dome cover dc iris adjustment volume power input jack exterior camera body interior lens dome base accessories power plug cable mode setting switch line phase adjustment volume t w view angle adjustment lever n focus adjustme...

  • Page 4

    Eg-4 attaching to the bracket you can use the tripod screw hole (1/4” - 20unc) to attach the camera body to the bracket. Tightening the screws with excessive force may damage the camera. Attach the camera body. Attach the camera body to the ceiling or wall. You can have the cables run on the exterio...

  • Page 5

    Eg-5 be sure to check that the cables are connected correctly before turning the power on. Turning on the power when the cables are connected with incorrect polarity may damage the camera. Use only power supply marked class 2. Use the service monitor jack when adjusting the lens focus. Connecting th...

  • Page 6

    Eg-6 setting the mode setting switch do not alter the position of the mode setting switch marked “fix” from its factory default setting. If the set position is changed, the auto iris may become inoperable. $.$. &)8 !'#(, ",#/./&& &,/./&& ,,).4 7"!7"!47 $././&& $.7"3ync&,",#!'#&)8 /.!7",,/./.($. /&&!...

  • Page 7

    Eg-7 adjusting the view angle and focus move the lever to adjust focus and angle of view. 1 2 view angle adjustment lever focus adjustment lever installation and adjustment complete attach the inner cover. After aligning the inner cover as shown in the right fi gure, push it until you hear a click. ...

  • Page 8

    Eg-8 specifications model no. Zc-d7312nha zc-dn7312nha d-dn (digital day/night) function model m-dn (mechanical day/night) function model focal length 3.3 mm - 12 mm max. Aperture ratio 1 : 1.4 iris f1.4 - f360c (dc auto iris) angle of view (wide to tele) d 125.7° - 29.9° h 89.8° - 23.9° v 63.6° - 1...