- DL manuals
- Ganz
- Security Camera
- ZC-Y20PH
- Instruction Manual
Ganz ZC-Y20PH Instruction Manual
Summary of ZC-Y20PH
Page 1
Colour cs mount camera 230vac type zc-y20ph3 24vac/12vdc type zc-y20ph4 instruction manual zc-y20ph.
Page 2
Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. Table of contents 1. Safety precautions ……………………………………………………………………… 3 2. General description …………………………………………………………………… 4 3. Precautions...
Page 3: Warning
3 ■ when installing the unit ● do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock. ● install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. D...
Page 4
4 2. General description the zc-y20ph3 is a 1/3 type, ac mains-operated, high-resolution color camera. The zc-y20ph4 is a 1/3 type, 24 vac or 12 vdc-operated, high-resolution color camera. The 32x electronic sensitivity enhancer and wide dynamic circuitry combine to ensure clear surveillance in dark...
Page 5
5 the above numbers are used when describing each part in this manual. * this key permits delicate setting of the camera property. For details, refer to the setup manual for the color cameras. 4. Nomenclature ① ② ③ ④ ⑥ ⑧ ⑨ ⑤ ⑦ ⑬ ⑫ ⑩ ⑩ ⑪ ⑪ (zc-y20ph3) (zc-y20ph3) (zc-y20ph4) note: controls ⑤ , ⑥ , an...
Page 6
6 video out video in : bnc plug monitor tv video out video in monitor tv to ac mains to 24 vac or 12 vdc zc-y20ph4 zc-y20ph3 ⑩ video output terminal ⑩ video output terminal 5. Installation 1. Mount the optional camera mounting bracket to the ceiling or wall. The bracket must be fixed securely using ...
Page 7
7 7. About the lenses 7.1. Lens (optional) selection and camera setting ● when using the flickering-reduction function outdoors or under the fluorescent lighting in the area with the power frequency of 50 hz, use the auto-iris lens. Follow the procedure below to perform the setting: 1. Set the lens ...
Page 8
8 8. Adjustment 1. Supply power to the camera. The power indicator ⑪ will light. 2. Flickering of lighting may interfere with the view when the camera is used in the room in the area with power frequency of 60 hz. To view the flickering-free picture, shift the flickering-reduction switch of the mode...
Page 9
9 camera function setting the following 8 functions can be set and reset. Note be sure to set the mode switch (for agc, backlight compensation, atw, and flickering-reduction operation settings) to the "(menu)" position. Failure to do this makes it impossible to set the "shutter speed/flickering- fre...
Page 10
10 side panel-mounted menu keys →ＬＥＮＳ ＳＥＬＥＣＴ ＳＨＵＴＴＥＲ ＳＰＥＥＤ ＢＡＣＫＬＩＧＨＴ Ａ Ｇ Ｃ Ｓ Ｅ Ｎ Ｓ Ｕ Ｐ Ｗ Ｈ Ｉ Ｔ Ｅ Ｂ Ａ Ｌ Ａ Ｎ Ｃ Ｅ ＣＨＲＯＭＡ ＬＥＶＥＬ ＥＮＨＡＮＣＥＲ ＣＡＭＥＲＡ ＩＤ ＰＲＥＳＥＴ ・ ＬＥＮＳ ＳＥＬＥＣＴ →ＡＵＴＯ ＭＡＮＵＡＬ ＩＲＩＳ ＬＥＶＥＬ ＬＯＷーーーーーーー＋ー＊ーーーーーＨＩＧＨ ＡＶーーーーー＊ー＋ーーーーーーーＰＫ note use the menu keys ( ▲ key, ▼ key, set key, and /clr key) located...
Page 11
Using the ▲ key and the ▼ key, move the flashing [ → ] cursor to the desired speed, and press the set key to register the setting. The display will then return to the initial screen. Notes ● when "auto" (auto iris) is selected on the lens selection screen, the indication of aes is not displayed. ● w...
Page 12
12 ＡＧＣ →ＡＵＴＯ ＦＩＸ ＯＦＦ ＡＧＣ ＡＵＴＯ →ＦＩＸ ＯＦＦ （ ｄＢ） ０ ５ １０ １５ １８ ーーーーー＋＊ーーー＋ーーーー＋ーーー ■ automatic gain control (agc) and sensitivity level settings ● agc/sensitivity level setting screen 1 an agc level can be automatically changed, maintained constant or set for off. This screen also permits a sensitivity l...
Page 13
13 operation when flickering- reduction function is set agc sensitivity operation provides flickering-reduction operations only in bright lighting conditions. Provides flickering-freduction operations only in bright lighting conditions. Always provides flickering- reduction operations. Auto auto fix...
Page 14
14 ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ ＡＷＢ →ＭＡＮＵＡＬ１ ＭＡＮＵＡＬ２ ＭＩＮ ＭＡＸ Ｒ ーーーーー＊ー＋ーーーーーーーー Ｂ ーーーーーーー＋ー＊ーーーーーー ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ ＡＷＢ ＭＡＮＵＡＬ１ →ＭＡＮＵＡＬ２ ＭＩＮ ＭＡＸ Ｒ ーーーーーーー＋ーーーー＊ーーー Ｂ ーーーー＊ーー＋ーーーーーーーー when manual 1 or manual 2 is selected, the [ ＊ ] cursor in the indication of "r ーー＋ーー " first flashes, and a red level can be v...
Page 15
15 ＣＨＲＯＭＡ ＬＥＶＥＬ →ＮＯＲＭＡＬ ＭＡＮＵＡＬ ■ chroma level setting ● chroma level setting screen 1 you can adjust the chroma level of the picture as you like. Move the flashing [ → ] cursor with the ▲ key and the ▼ key to select either normal or manual, then press the set key to register the setting. When you se...
Page 16
16 ＣＡＭＥＲＡ ＩＤ →ＯＦＦ ＯＮ ＣＡＭＥＲＡ ＩＤ ＯＦＦ →ＯＮ Ｌｏｗｅｒ Ｒ →Ｌｏｗｅｒ Ｌ Ｕｐｐｅｒ Ｌ Ｕｐｐｅｒ Ｒ ＊＊＊＊＊＊＊＊ ■ camera id title setting ● camera id title setting screen 1 you can use up to 8 alphanumeric characters and symbols to set a camera id title. The title can be displayed at one of the following 4 locations on the screen...
Page 17
17 ＰＲＥＳＥＴ →ＮＯ ＹＥＳ ＣＡＭＥＲＡ ＩＤ ＊＊＊＊＊＊＊＊ ←→ ＳＰＡＣＥ ＣＬＥＡＲ ＥＮＤ ０１２３４５６７８９ ＡＢＣＤＥＦＧＨＩＪＫＬＭ ＮＯＰＱＲＳＴＵＶＷＸＹＺ ａｂｃｄｅｆｇｈｉｊｋｌｍ ｎｏｐｑｒｓｔｕｖｗｘｙｚ ！？／（）〈〉：. ・, ー ＆＃♪ ● camera id title setting screen 3 ● the id title's leftmost [ ＊ ] cursor flashes, indicating that the character may be entered. ● the cursor for character se...
Page 18
● lens auto/manual selector switch auto manu set the switch to this position when using an auto-iris lens. Auto manu set the switch to this position when using a manual-iris or fixed iris lens. ● agc switch off (agc) normally, set the switch to this position. Even when an ambient brightness level ch...
Page 19
19 1/120 (1/50) normally, set the switch to this position. Flickering of the picture may interfere with the view under fluorescent lamps in the area with power frequency of 50 hz. In such cases, set the switch to "1/120" position, and the image free from flickering can be obtained. Note placing the ...
Page 20
Note: specifications and appearance are subject to change without notice. Zc-y20ph3 zc-y20ph4 230 vac, 50/60 hz 24 vac, 50/60 hz or 12 vdc 5 w 1/3 type it-ccd 752 (h) x 582 (v) 440,000 pixels 2:1 interlace horizontal: 15.625 khz, vertical: 50.00 hz vbs 1.0 v p-p , 75 Ω , bnc internal, line locking (...