Ganz ZM-TY110A Instruction Manual - page 5
EG-5
FRONT PANEL COMPONENTS AND CONTROLS
Power Switch
On/off switch. If you press this button, the monitor is turned on and the LED of
selected input signal is lit.
VIDEO Input Selection Switch
It selects video and audio input signal. To change input signal, press this button.
VOLUME, DATA Control Switch
VOLUME key has two functions :
• Volume Controls : To change volume, press only this key.
• Data Controls :
If you press CONTRAST, BRIGHT, COLOUR, TINT or SHARP
and then VOLUME key, you can change the value of each key.
CONTRAST Switch
This control adjusts the contrast of the screen image. Press CONTRAST switch and
then VOLUME(DATA) switch to control the contrast. (Default is 60).
BRIGHT Switch
This control adjusts the brightness of the screen image. Press BRIGHT switch and
then VOLUME(DATA) switch to control the brightness. (Default is 50).
COLOUR Switch
This control adjusts the colour intensity of the screen image. Press COLOUR switch
and then VOLUME(DATA) switch to control the colour intensity. (Default is 50).
TINT Switch
With this switch, you can control the colour to be close to natural colour.
For the best result, control screen image with this switch so that skin colour is
natural. Press TINT switch then VOLUME(DATA) switch to control the colour.
(Default is 50).
SHARP Switch
This control adjusts the sharpness of the screen image. Press SHARP switch and
then VOLUME(DATA) switch to control the sharpness. (Default is 50).
SHARP
TINT
COLOR
BRIGHT CONTRAST
VOLUME
DATA
A
B
C
VIDEO
POWER
ZM-TY110A
ZM-TY114A
ZM-TY115HA
ZM-TY121A
POWER
VIDEO
DATA
VOLUME
CONTRAST
BRIGHT
COLOR
TINT
SHARP