Summary of ZN-D212XE
Page 1
Ipn2102hd-5511 installation guide.
Page 2: Information To User
Information to user caution risk of electric shock, do not open ! Caution: to reduce the risk of electric shock, do not remove cover (or back). Contact qualified service personnel for internal parts. This symbol is intended to alert the user the presence of un-insulated “dangerous voltage” within th...
Page 3
Zn-d212xe installation guide 01a.01 3 table of contents 1. Features ................................................................................................................. 4 2. Package contents ...................................................................................................
Page 4
Zn-d212xe installation guide 01a.01 4 1. Features camera full hd indoor fisheye ip camera (vandal proof) high quality compression in real time streaming 1/2.7” 1080p cmos image sensor 180˚ wide and 160˚ vertical angle remote zoom/focus control(one click af) streaming dual streaming mode de-interlaci...
Page 5
Zn-d212xe installation guide 01a.01 5 2. Package contents unpack carefully and handle the equipment with care. The packaging contains: camera dc power adapter quick installation guide 9-pin and 2-pin terminal blocks fmb mount (for flush mount) screws and anchors note i the above contents are subject...
Page 6
Zn-d212xe installation guide 01a.01 6 3. Part names ① rest button the reset button can be used for restarting the device or resetting it to factory default. ② pal/ntsc button pressing the button cycles through pal, ntsc, and no video output mode: no video output -> pal->ntsc ③ video, audio, and io t...
Page 7
Zn-d212xe installation guide 01a.01 7 4. Installation 4.1. Option a. Semi-flush mount caution ! Installation template image’s size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separ ately..
Page 8
Zn-d212xe installation guide 01a.01 8 1) place the installation template on a surface where camera is going to be installed and mark the anchor block placements. 2) drill and insert anchor blocks on a marked surface. 3) mount the main camera body by aligning the anchor blocks and hold against the mo...
Page 9
Zn-d212xe installation guide 01a.01 9 4.2. Option b. Flush mount caution ! Installation template image’s size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separ ately. Installation template (fmb) 21 v1.0
Page 10
Zn-d212xe installation guide 01a.01 10 1) trace the size on a surface where the device will be inserted with the provided template and create a hole. Also, mark on a surface where anchor blocks will be inserted. 2) drill and insert anchor blocks on a marked surface. 3) connect all the appropriate ca...
Page 11
Zn-d212xe installation guide 01a.01 11 4.3. Setting the image attribute through the camera’s webpage, users can configure image settings. The camera image’s brightness, contrast, saturation and sharpness are adjustable through the image settings. (setup > video & audio > camera)..
Page 12
Zn-d212xe installation guide 01a.01 12 5. Connections ① audio input/output the camera has a mono audio input and a mono audio output. Due to low audio output power, an amplified speaker is recommended for enhanced sound (do not connect a headphone or earphone directly to the camera). ② sensor (di) c...
Page 13
Zn-d212xe installation guide 01a.01 13 ③ alarm (do) connection only the relay type is supported. Relay rating: max 24vdc 50ma caution ! Do not exceed the maximum relay rating. Caution ! Must connect gnd port which is located between systems. ④ video input/output the camera provides 1 video out video...
Page 14
Zn-d212xe installation guide 01a.01 14 ⑤ lan connection this is a rj45 lan connector for 10/100 base-t ethernet. Connect a lan cable. When the device is connected, the orange led stays on while green led continues to blink. ⑥ 12v dc power a 12 dc power connector is required for this device. Green le...
Page 15
Zn-d212xe installation guide 01a.01 15 6. Configuration 6.1.Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be sure that the dev...
Page 16
Zn-d212xe installation guide 01a.01 16 6.1.2. Custom ip environment ipadmintool is provided with sdk at the following sdk path. {sdk root}\bin\tools\admintool\ ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which inc...
Page 17
Zn-d212xe installation guide 01a.01 17 6.2. View video on web page type the proper ip address to view the live streaming images through a web browser. The default username and password is root / pass. 1. The browser asks to install the activex. Click allow. 2. Setup.Exe installation link or pop-up w...
Page 18
Zn-d212xe installation guide 01a.01 18 caution ! Caution ! 3. Follow the instructions of the dialog boxes and complete the installation. Once the installation is complete, start the web browser again and check if video stream is displayed in the main view frame. If “this software requires the micros...
Page 19
Zn-d212xe installation guide 01a.01 19 6.3. Reset perform the following procedures to reset your device: 1. Push the reset button and hold for 1~2 seconds. 2. Wait for the system to reboot. 6.4. Factory default if you reset your device to the factory default setting, all parameters including the ip ...
Page 20
Zn-d212xe installation guide 01a.01 20 appendix (a): specifications summary camera module cmos image sensor 1/2.7” 1080p cmos effective pixels 1920x1080 scanning system progressive scanning electrical resolution 1920 x 1080 min. Illumination color: 1.0 lux, f1.2 bw: 0.001 lux (b/w, sens-up 32x) agc ...
Page 21
Zn-d212xe installation guide 01a.01 21 electrical characteristics power source dc 12v / poe ieee802.3af (class 0) power consumption max 500ma video output 1 vp-p, 75Ω, composite audio input linein, 1.43vp-p(min 1.35vp-p, max 1.49 vp-p), 39 kΩ audio output lineout, 46mw power, 16 Ω d/i max 50ma@5vdc,...
Page 22
Zn-d212xe installation guide 01a.01 22 appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over-ethernet (poe) standard. Ieee 802.3af allows for two power options...
Page 23
Zn-d212xe installation guide 01a.01 23 appendix (c): dimensions (unit: mm).
Page 24
Zn-d212xe installation guide 01a.01 24 (unit: mm).
Page 25
Zn-d212xe installation guide 01a.01 25 appendix (d): hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1 1 26 38 4b 75 70...
Page 26
Zn-d212xe installation guide 01a.01 26 revision history man# date(m/d/y) comments 01a.01 05/21/2012 first release version.