Summary of ZN-PTZ202XE-XT
Page 2: Information To User
01a.00 2 information to user caution risk of electric shock, do not open ! Caution: to reduce the risk of electric shock, do not remove cover (or back). Contact qualified service personnel for internal parts. This symbol is intended to alert the user the presence of un-insulated “dangerous voltage” ...
Page 3
01a.00 3 table of contents 1. Features ................................................................................................................. 4 2. Package contents ................................................................................................ 5 3. Part names ...............
Page 4
01a.00 4 1. Features camera full hd outdoor high-speed dome ip camera high quality compression in real time streaming 1/3” high quality cmos image sensor optical 20x, digital 8x zoom true day / night (icr) stealth spin® (world’s most silent speed dome) 360° pan rotation streaming dual streaming mode...
Page 5
01a.00 5 2. Package contents unpack carefully and handle the equipment with care. The packaging contains: camera video connector quick installation guide note i the above contents are subject to change without prior notice. Zn-ptz202xe-xt isntallation guide.
Page 6
01a.00 6 3. Part names ① 3-pin terminal block connector for power connection (ac, fg, ac) ② video out cvbs : 1.0 vp-p / 75Ω composite3.5 ③ audio microphone stereo jack connector connector for 3.5mm audio jack plug. ④ audio speaker stereo jack connector connector for 3.5mm audio jack plug. ⑤ 8-pin te...
Page 7
01a.00 7 4. Installation 1) secure three screws in top of camera’s main body as three unit holders with metal rings attached in the end. 2) connect all necessary cables to a pcb board in a cover shield before conjoining the shield to a camera’s main body. 3) under the pcb board has a 32-pin connecto...
Page 8
01a.00 8 4.1. Setting the lens position the device is 360° rotating camera and fully controlled by web user interface. Once the unit’s installation is complete and connected properly, please refer to zn-xe series web user’s manual for the device’s camera configuration instructions. 4.2. Setting the ...
Page 9
01a.00 9 5. Connections ① audio mic in and line out (3.5mm) support pcm8/16, g.711 a-law, and u-law compression formats. ② sensor (di) connection the camera provides 4 channel d/i. Name descriptions in4 alarm signal input 4 in3 alarm signal input 3 gnd ground in2 alarm signal input 2 in1 alarm signa...
Page 10
01a.00 10 ④ lan connector use 10/100 base-t ethernet cable to connect to a network. Use rj45 coupler to extend the cable. ⑤ 12v dc power a 3-pin terminal block is used for power output. Function pin notes dc output ac~ 1 fg 2 ac~ 3 ⑥ micro sd slot located on top of main device, next to 32-pin socket...
Page 11
01a.00 11 6. Configuration 6.1.Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be sure that the device and pc are on a same area...
Page 12
01a.00 12 6.1.2. Custom ip environment ipadmintool is provided with sdk at the following sdk path. {sdk root}\bin\tools\admintool\ ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations,...
Page 13
01a.00 13 6.2. View video on web page type the proper ip address to view the live streaming images through a web browser. The default username and password is root / pass. 6.2.1. Activex installation 1. When the browser asks to install the axumf software, click install to proceed. 2. When setup inst...
Page 14
01a.00 14 caution ! 6.2.2. View video using ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. Ipadmintool is provided with sdk at the following sdk path. {sdk root}\bin\tools\admintool\ 1. From t...
Page 15
01a.00 15 6.3. Reset perform the following procedures to reset your device: 1. Press the reset button for 2 seconds. 2. Wait for the system to reboot. 6.4. Factory default resetting the device back to the factory default will initialize all parameters including the ip address back to the factory def...
Page 16
01a.00 16 appendix (a): specifications summary camera module cmos image sensor 1/3” 1080p cmos effective pixels 1920x1080 scanning system progressive scanning electrical resolution 1920 x 1080 min. Illumination color: 1.5lux(50 ire) / 0.02lux(sens-up) b/w : 0.1lux(50 ire) / 0.001lux(sens-up) type dc...
Page 17
01a.00 17 electrical characteristics power source ac 24v ±10%, poe+ (ieee802.3at) power consumption max. 52w (heater on) video output 1 vp-p, 75Ω, composite audio input / output mic in, line out audio format pcm8/16, g.711 a-law, u-law d/i d/o environment condition operating temperature operating ra...
Page 18
01a.00 18 appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over-ethernet (poe) standard. Ieee 802.3af allows for two power options for category 5 cables. The i...
Page 19
01a.00 19 appendix (c): dimensions (unit: mm) zn-ptz202xe-xt isntallation guide.
Page 20
01a.00 20 appendix (d): hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1 1 26 38 4b 75 70 112 95 149 ba 186 df 223 2 2...
Page 21
01a.00 21 revision history man# date(m/d/y) comments 01a.00 12/06/2012 first release version zn-ptz202xe-xt isntallation guide.