Summary of ZN-PTZ500VPE
Page 2
Ipe5500 osd menu control manual 2010.5‐1 03a.00 2 table of contents 1. Osd display of main screen.................................................................................... 3 2. General rules of key operation.............................................................................. 4 3....
Page 3
Ipe5500 osd menu control manual 2010.5‐1 03a.00 3 1. Osd display of main screen z p/t/z information current pan/tilt angle in degree, zoom magnification and a compass direction. Z camera id current camera id(address). Followings are possible action titles and their meaning. "set preset ×××" when pre...
Page 4
Ipe5500 osd menu control manual 2010.5‐1 03a.00 4 2. General rules of key operation • the menu items surrounded with ( ) always has its sub menu. • for all menu level, to go into sub menu, press near key. • to go to up‐one‐level menu, press far key. • to move from items to item in the menu, use joys...
Page 5
Ipe5500 osd menu control manual 2010.5‐1 03a.00 5 3. Main menu z system information displays system information and configuration. Z display setup enable/disable of osd display on main screen. Z dome camera setup configure various functions of this camera. Z system initialize initializes system conf...
Page 6
Ipe5500 osd menu control manual 2010.5‐1 03a.00 6 4. Display setup this menu defines enable/disable of osd display on main screen. If an item is set to be auto, the item is displayed only when the value of it is changed. Z camera id [on/off] z ptz information [on/off/auto] z action title [on/off/aut...
Page 7
Ipe5500 osd menu control manual 2010.5‐1 03a.00 7 5. Privacy zone mask setup select area in image to mask. Z mask no [1~4] select mask number. If the selected mask has already data, camera moves as it was set. Otherwise, “undefined” will be displayed under “mask no”. Z display [on/off] sets if camer...
Page 8
Ipe5500 osd menu control manual 2010.5‐1 03a.00 8 privacy zone size adjustment adjust mask size. Use joystick or arrow buttons to adjust mask size. Z (left/right) adjusts mask width. Z (up/down) adjusts mask height. Edit mask 1 ------------------------ [ :adjust mask width] [ :adjust mask height] [n...
Page 9
Ipe5500 osd menu control manual 2010.5‐1 03a.00 9 6. Camera setup setup the general functions of zoom camera module. Z focus mode [auto/manual/semiauto] sets camera focus mode. { semiauto mode this mode exchanges focus mode automatically between manual focus mode and auto focus mode. Manual focus mo...
Page 10
Ipe5500 osd menu control manual 2010.5‐1 03a.00 10 auto exposure setup ae setup - global ------------------------ backlight off day/night auto1 brightness 25 iris auto shutter esc agc normal ssnr middle sens-up back exit z backlight [on/off] sets backlight compensation z day/night [auto1/auto2/day/n...
Page 11
Ipe5500 osd menu control manual 2010.5‐1 03a.00 11 7. Motion setup setup the general functions of pan/tilt motions. Z motion lock [on/off] if motion lock is set to on, it is impossible to set up and delete preset, swing, pattern and group. It is possible only to run those functions. To set up and de...
Page 12
Ipe5500 osd menu control manual 2010.5‐1 03a.00 12 z freeze in preset [on/off] at start point of preset movement, camera starts freezing the image of start point. Camera keeps displaying the image of start point during preset movement and does not display the images which camera gets during preset m...
Page 13
Ipe5500 osd menu control manual 2010.5‐1 03a.00 13 alarm input setup match the alarm sensor input to one of preset positions. If an external sensor is activated, camera will move to corresponding preset position when this item is predefined. Z alarm × type [normal open/normal close] sets sensor inpu...
Page 14
Ipe5500 osd menu control manual 2010.5‐1 03a.00 14 8. Preset setup z preset number [1~128] if a selected preset is already defined, camera moves to pre‐defined position and preset characteristics such as label and relay outputs show on monitor. If a selected preset is not defined, “undefined” shows ...
Page 15
Ipe5500 osd menu control manual 2010.5‐1 03a.00 15 edit preset scene (1) using joystick, move camera to desired position. (2) by pressing near key, save current ptz data. (3) press far key to cancel. Edit preset label (1) edits label to show on monitor when camera arrives at presets. In edit label m...
Page 16
Ipe5500 osd menu control manual 2010.5‐1 03a.00 16 if you want to use blank, choose space character (" "). If you want to delete a character before, use back space character (" ←"). (3) if you complete the label editing, move cursor to "ok" and press near key to save completed label. To abort curren...
Page 17
Ipe5500 osd menu control manual 2010.5‐1 03a.00 17 9. Swing setup z swing number [1~8] selects swing number to edit. If a selected swing has not defined, "not used" is displayed in 1st position and 2nd position z 1st position 2nd position [preset 1~128] set up the 2 position for swing function. If a...
Page 18
Ipe5500 osd menu control manual 2010.5‐1 03a.00 18 10. Pattern setup z pattern number [1~4 ] selects pattern number to edit. If a selected pattern number is not defined, "undefined" will be displayed under selected pattern number. Z clear pattern [cancel/ok] deletes data in current pattern z edit pa...
Page 19
Ipe5500 osd menu control manual 2010.5‐1 03a.00 19 (2) move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in a selected pattern. The total memory size and the rest memory size is displayed in the form of bar. Maximum 1200 communication commands ca...
Page 20
Ipe5500 osd menu control manual 2010.5‐1 03a.00 20 11. Group setup z group number [1~8] selects group number to edit. If a selected group number is not defined, "undefined" will be displayed under selected group number. Z clear group [cancel/ok] deletes data in current group z edit group starts edit...
Page 21
Ipe5500 osd menu control manual 2010.5‐1 03a.00 21 edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 preset 1 00:03 360 2 none 3 none 4 none 5 none ------------------------ save [near:edit act] cancel [far :edit end] edit group 1 ------------------------ no act...
Page 22
Ipe5500 osd menu control manual 2010.5‐1 03a.00 22 edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 preset 1 00:03 360 2 none 3 none 4 none 5 none ------------------------ save cancel (6) after finishing setting up all actions, press far key to exit. Then curs...
Page 23
Ipe5500 osd menu control manual 2010.5‐1 03a.00 23 12. System initialize z clear all data deletes all configuration data such as display, camera, motion setup and so on. Z clear display set initializes display configuration z clear camera set initializes camera configuration z clear motion set initi...
Page 24
Ipe5500 osd menu control manual 2010.5‐1 03a.00 24 13. Specifications model ×10 video signal system ntsc pal ccd 1/4'' interline transfer ccd max. Pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels 768(h)×494(v) 380k 752(h)×582(v) 440k horizontal res. 500 tv line(color), 570 tv line(b/w) ...
Page 25
Ipe5500 osd menu control manual 2010.5‐1 03a.00 25 group 8 group (20 action entities per group) other functions auto flip, auto parking, power up action etc. Communic ation rs‐485 protocol pelco‐d, pelco‐p selectable privacy zone 4 zone alarm input 4 input osd menu / ptz information etc dc type : dc...