Ganz ZN-S1000AE Hardware Manual

Manual is about: MPEG-4 Encoder Series

Summary of ZN-S1000AE

  • Page 2: Table Of Contents

    Table of contents 1. Introduction.......................................................................................................................................4 2. Product description ..............................................................................................................

  • Page 3

    Safety precautions users are strongly advised to adhere to directions and recommendations offered in this manual. Failure to do so may result in problems during operation. • make sure the correct voltage is being supplied before turning the power on. • do not install with the power turned on. Doing ...

  • Page 4

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 4 1. Introduction zn-s100ae, zn-s1000ae, zn-s2000ae and zn-s4000ae compress video/audio data and transmit the compressed video/audio data through the network in real time. Ganz encoder provides a high quality video image with a limited bandwidth ...

  • Page 5

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 5 2. Product description 2.1. Specifications ganz encoder series specification is shown as following table 1. Zn-s100ae zn-s1000ae zn-s2000ae zn-s4000ae 2ch mpeg-4 50/60fps@d1 4ch mpeg-4 100/120fps@d1 1ch mpeg-4 25/30fps@d1 1ch mpeg-4 25/30fps@d1...

  • Page 6

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 6 2.2. Functions 2.2.1. Front panel figure 1. Front panel of zn-s4000ae ① , ② indicator led (status, network) status (orange) and network (green) indicators display the following system information: status (orange) network (green) power off off o...

  • Page 7

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 7 single stream dual stream model video input video loop-out video input video loop-out zn-s100ae vin1 - - - zn-s1000ae vin1 video loop-out - - zn-s2000ae vin1, vin2 t-bnc connector vin1 vin2 zn-s4000ae vin1, vin2, vin4 t-bnc connector vin1, vin3...

  • Page 8

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 8 2.2.2. Rear panel figure 2. Rear panel of zn-s4000ae figure 3. Rear panel of zn-s100ae ① , ⑨ audio input jack (ain 1,2 and ain 3,4) zn-s2000ae and zn-s4000ae have mono audio input channels using stereo audio socket. Therefore, a special cable i...

  • Page 9

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 9 zn-s2000ae figure 5. Zn-s2000ae audio input connection zn-s4000ae figure 6. Zn-s4000ae audio input connection please pay attention to electric characteristics during installation. (detailed instructions are being prepared.) ② audio output jack ...

  • Page 10

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 10 ③ digital input (di 1~4) zn-s1000ae/2000 use 6 port terminal block for 2 channel digital outputs. Zn-s4000ae uses 8 port terminal block for 4 channel digital outputs as shown figure 2. It can be connected either voltage type sensor or relay ty...

  • Page 11

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 11 figure 9. Relay type digital input connection please pay attention to electric characteristics during installation. (detailed instructions are being prepared.) ④ digital output (do 1~4) zn-s1000ae/2000 use 6 port terminal block for 2 channel d...

  • Page 12

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 12 please pay attention to electric characteristics during installation. (detailed instructions are being prepared.) ⑤ rs-232c terminal block (rs-232c) rs-232c terminal block is used for some devices such as pos terminal block. Figure 11. Rs-232c...

  • Page 13

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 13 2.3. Serial number / mac address serial number and mac address is attached on the bottom as shown in figure 13. Figure 13. Serial number/ mac address 550012345 mac 00-1c-b8-c0-14-b1 zn-s4000ae p122404010000-10002 mac address serial number.

  • Page 14

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 14 3. Installation 3.1. Basic connections figure 14 and figure 15 illustrate the basic connection of zn-s4000ae. Figure 14. Front panel connection.

  • Page 15

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 15 figure 15. Rear panel connection 3.2. Package contents ganz encoder assembly -1ea (zn-s4000ae, zn-s2000ae or zn-s1000ae) zn-s100ae zn-s1000ae zn-s2000ae zn-s4000ae audio cable lan cable - only cable for audio input is provided - except zn-s100...

  • Page 16

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 16 3.3. Installation example figure 16. Ganz encoder series application example normal operation may not be possible if temperature or humidity exceed levels recommended in the ganz encoder specification. Problems may also occur in wireless envir...

  • Page 17

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 17 4. Operation description 4.1. Factory default settings factory default settings are as follows: • ip address: 192.168.Xx.Yy (refer to 2.3 serial number / mac address) • mask: 255.255.0.0 • gateway: 192.168.0.1 • user id: root • password: pass ...

  • Page 18

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 18 5. Power over ethernet (poe) the poe module used in ganz encoder is commercially available module without modification. The standard ganz encoder does not include poe module in it. Poe module is included on the request of a customer. For the d...

  • Page 19

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 19 figure 19. Zn-s1000ae without poe module figure 20. Zn-s1000ae with poe module installed 5.3. Poe compatibility with non power sourcing equipment (pse) when it is connected with non pse, the power adaptor should be connected. With power adapto...

  • Page 20

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 20 5.4. Power classfication the poe power class supported by ganz network camera/encoder is as following table 4. Model power class zn-d310ae zn-d(n)t3500ae zn-s100ae zn-s1000ae zn-s2000ae zn-s4000ae 0 table 4. Power class supported by ganz netwo...

  • Page 21

    Ganz mpeg-4 encoder series hardware manual 2010/2-1 o 21 6. Electrical characteristics 6.1. Operating conditions parameters min typical max units peak to peak amplitude 0.5 1 1.35 v sync amplitude 143 286 386 mv horizontal lock range - - ± 6.2 % of line length video input range color sub-carrier loc...