Summary of ZN-S1000VE
Page 1
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 1.
Page 2: Table Of Contents
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 2 table of contents 1. Introduction............................................................................................................. 3 2. Product description .................................................................................
Page 3
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 3 1. Introduction zn‐s100v and zn‐s1000ve are encoder module. Zn‐s100v/zn‐s1000ve compress video/audio data and transmit the compressed video/audio data through the network in real time. Zn‐s100v/zn‐s1000ve provides a high quality video image with ...
Page 4
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 4 2. Product description 2.1. Function specification zn‐s100v/zn‐s1000ve series specification is shown as following table. Zn‐s100v/zn‐s1000ve series item zn‐s100v zn‐s1000ve number of streams dual stream, configurable input channel 1ch output chan...
Page 5
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 5 on‐screen display real‐time display of tracking data and events vca surveillance (optional) detection behavior direction, stopping, loitering, entering, exiting, appear, and disappear filters 3d behavior perspective corrected size and speed filte...
Page 6
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 6 3. Installation & configuration 3.1. Package contents the package contains the following. Please make sure all listed items are included in the box. Zn‐s100v or zn‐s1000ve ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 1 lan cable (cross typ...
Page 7
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 7 3.2. Components 3.2.1. Front panel figure 1. Front panel of zn‐s1000ve figure 2. Front panel of zn‐s100v ① video input bnc connector (vin 1) it is mainly used for video inputs. ② video output bnc connector this connector is used for loop‐out of v...
Page 8
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 8 2. System initialization item status data in process off blinking dark orange normal state orange off abnormal state orange dark orange 3. Kernel booting up item status data in process orange green normal state orange off abnormal state orange gr...
Page 9
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 9 figure 4. Power connection ⑧ reset switch (reset) reset switch is used for restarting zn‐s100v/zn‐s1000ve or resetting zn‐s100v/zn‐ s1000ve as factory default (fd). Refer to ‘4.1. Factory default settings’ for detailed procedures. 3.2.2. Rear pan...
Page 10
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 10 figure 6. Terminal block 1. Audio input zn‐s1000ve has one channel mono audio input. 2. Audio output zn‐s1000ve has one channel mono audio output. As the output power for the audio is low, amplifier speaker is needed (do not use a headphone or e...
Page 11
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 11 please pay attention to electric characteristics during installation. (detailed instructions are being prepared.) figure 9. Digital output connection 5. Rs‐485 the rs‐485 serial port consists of data+, data‐ and gnd as following figure 10. Figur...
Page 12
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 12 ④ power adaptor connector (dc 12v) zn‐s1000ve needs a dc 12v 1a adapter for power supply. Figure 12. Power connection ⑤ reset switch (reset) reset switch is used for restarting zn‐s100v/zn‐s1000ve or resetting zn‐s100v/zn‐ s1000ve as factory def...
Page 13
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 13 3.3. Basic connection figure 13. Zn‐s1000ve’s front panel connection figure 14. Zn‐s1000ve’s rear panel connection normal operation may not be possible if temperature or humidity exceed levels recommended in the zn‐s100v/zn‐s1000ve specification...
Page 14
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 14 3.4. Serial number / mac address serial number and mac address is attached on the bottom as shown in figure 15. Figure 15. Serial number/ mac address mac address serial number 550012345 mac 00:1c:b8:c0:14:b1 zn-s1000ve p1331010100000-121.
Page 15
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 15 4. Operation description 4.1. Factory default settings factory default settings are as follows: • ip address: 192.168.Xx.Yy (refer to 2.3 serial number / mac address) • mask: 255.255.0.0 • gateway: 192.168.0.1 • user id: root • password: pass to...
Page 16
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 16 1. Press reset. The red data led will blink several times. When reset function is activated, the red data led will turn on. User may stop pressing reset at this point. 2. When “reset” function has been completed, the green data led will turn on ...
Page 17
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 17 5. Power over ethernet (poe) the poe module used in zn‐s100v/zn‐s1000ve is commercially available module without modification. The standard zn‐s100v/zn‐s1000ve does not include poe module in it. Poe module is included on the request of a custome...
Page 18
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 18 6. Electrical characteristics 6.1. Operating conditions parameters min typical max units peak to peak amplitude 0.25 1 2 v sync amplitude 72 286 572 mv horizontal lock range ‐ ‐ ±7 % of line length video input range color sub‐carrier lock‐ in ra...
Page 19
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 19 7. Dimensions zn‐s100v unit : mm 26.3 94.6 74.6 106.6 98.
Page 20
Zn-s100v/zn-s1000ve hardware manual 2010/2-1 d1a.02 20 zn‐s1000ve h. 264 network video enc o de r status data vin vout 1ch encoder sd usb dc12v ethernet reset di 2 rx tx 1 rs-232 ain c rs-485 do 2 1 aout 1 1 unit : mm 103.4 141.4 121.7 37.7.