Warning before installation contact your distributor when such cases happen. Power off the ip camera as soon as it is found smoking or smelt unusual. Do not place the ip camera around the heat sources, such as television or oven. Keep the ip camera away from direct sunlight. Keep the ip camera away ...
2 do not place the ip camera on unsteady surfaces. Do not disassemble the ip camera. Do not insert any object into the ip camera, such as needles. Do not touch the ip camera when it's lightening. Do not drop the ip camera..
Camera stand zn-yh305 quick installation guide warranty card power adapter software cd check package contents 1 3.
4 front panel manual focus ring mic internal ring screw mic in power cord socket audio out general i/o terminal block indented reset button ethernet 10/100 rj45 socket back panel up cover status led physical description 2.
Install your ip camera in ethernet network 1. If you have external devices such as sensors and alarms, make connection from general i/o terminal block. 3. Finally, connect power cord to a power outlet. 2. Use ethernet cable to make connection from ethernet 10/100 rj45 socket to the hub. ＊ use catego...
6 001cb83 rohs pat. 6,930,709 ip camera model no:zn-yh305-a note the serial number from the label on the unit. This serial number is same as ethernet address, for example: 001cb8300052=00-1c-b8-30-00-52 001cb83 rohs pa t. 6, 93 0, 70 9 ip camera model no:zn-yh305-a a assign ip address 4.
7 assign ip address b using installer program 1. Run the "installation wizard" under the software utility directory from software cd. 2. The program will search the ganz video receivers, video servers or ip cameras on the same lan. 00-1c-b8-30-00-52 00-1c-b8-30-00-52 3.After searching, the main inst...
