1. DL manuals
  2. Ganz
  3. Security Camera
  4. ZN1-M3FN3
  5. Installation Manual

Ganz ZN1-M3FN3 Installation Manual

Manual is about: PixelPro GXi Series H.264 network camera

Summary of ZN1-M3FN3

  • Page 1

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 1.

  • Page 2

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 2 precaution please read this manual carefully before installing the unit. Never disassemble the camera. Unauthorized disassembly may cause equipment failure or damage to the unit. Please do not install the camera in a place exposed to direc...

  • Page 3

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 3 table of contents precaution ................................................................................................................ 2 1. Features ......................................................................................

  • Page 4

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 4 1. Features camera 1/4” 720p cmos image sensor digital day/night wdr vandal proof (ik09) video h.264 baseline, main, high profile(mpeg-4 part 10/avc), mjpeg(motion jpeg) max 30fps in 720p text overlay network 10 / 100 base-t ethernet integ...

  • Page 5

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 5 2. Package contents please unpack the package carefully and handle the equipment with care. The package contains: camera screws and anchor blocks quick installation guide hex wrench driver white plug installation template note i the conten...

  • Page 6

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 6 3. Part names ① lan connector rj45 lan connector for 10/100 base-t ethernet (poe supported). ② reset button use the button to restart the device or to reset it to factory default. Refer to “6.3. Reset” and “6.4.Factory default” for more de...

  • Page 7

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 7 4. Installation 4.1. Installing the camera caution ! To prevent products from damage, place the camera on stable and non- vibrating surfaces if the stability is in doubt, consult safety personnel for reinforcements, and then proceed with t...

  • Page 8

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 8 installation template (unit: mm) caution ! Installation template’s image size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separately..

  • Page 9

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 9 4.2. Adjusting the angle of camera adjust the lens to the desired position by manually moving its upper lens shell, reinforced body or horizontal platform in the following directions. B. To pan, rotate the lower body of the camera gimbal. ...

  • Page 10

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 10 4.3. Setting the image attribute through the camera’s webpage, users can configure image settings. The menu of image attribute is available under video appearance menu in setup > video & audio > camera. The following features can be adjus...

  • Page 11

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 11 5. Connections lan connection this is rj45 lan connector for 10/100 base-t ethernet and poe. Use the ethernet cable (rj45) to power the device, and connect the device to a hub or a router in the network. Refer to “appendix (b) power over ...

  • Page 12

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 12 6. Configuration 6.1. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the devi...

  • Page 13

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 13 6.1.2. Custom ip environment ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and dev...

  • Page 14

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 14 6.2. View video on web page type the proper ip address to view the live streaming images through a web browser. The default username and password is root / pass. 6.2.1. Activex installation 1. When the browser asks to install the axumf so...

  • Page 15

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 15 caution ! 6.2.2. View video using ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. 1. From the ipadmintool’s product list, select th...

  • Page 16

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 16 6.3. Reset perform the following procedures to rest your device: 1. Press the reset button for 2 seconds while the device is in use. 2. Wait for the system to reboot. Caution ! Please do not hold for more than 2 seconds. Otherwise, the ca...

  • Page 17

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 17 6.5. Safe mode what is safe mode? Your ip camera or encoder could encounter an unexpected occasion such as broken firmware file or uncompleted loading of firmware file during system booting. To restore the device from the occasions, the d...

  • Page 18

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 18 note i there is another method to update firmware, which is using ipadmintool. Please refer to ‘ipadmintool user’s manual.Pdf’ for the detailed procedure. Note i if your device is still at safe mode after trying to update firmware, please...

  • Page 19

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 19 appendix (a): specifications summary camera module cmos image sensor 1/4” 720p cmos effective pixels 1280 x 720 scanning system progressive scanning electrical resolution 1280 x 720 min. Illumination color: 1.0lux b/w : 0.001 lux (dss on)...

  • Page 20

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 20 electrical characteristics power source poe ieee802.3af power consumption 2.4w @ poe video output - audio input - audio output - d/i - d/o - environment condition operating temperature operating range poe : 0 ˚c ~ 40 ˚c (32˚f ~ 104˚f) ope...

  • Page 21

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 21 appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over-ethernet (poe) standard. Ieee 802.3af allow...

  • Page 22

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 22 appendix (c): dimensions (unit: mm).

  • Page 23

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 23 appendix (d): hexadecimal-decimal conversion table refer to the following table when converting the mac address of the device to the ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 ...

  • Page 24

    Pixelpro gxi series zn1-m3fn3 installation guide 03-2014-a 24 revision history man# date(m/d/y) comments 01a.01 07/05/2013 first release version 09-2013-a 09/04/2013 minor updates 03-2014-a 03/31/2014 correct explanation for poe.