1. DL manuals
  2. Ganz
  3. Security Camera
  4. ZN1-V4FN3
  5. Installation Manual

Ganz ZN1-V4FN3 Installation Manual

Manual is about: PixelPro series

Summary of ZN1-V4FN3

  • Page 1

    Pixelpro gxi ipx/ipn series zn1-v4fn3/fn4ipn8102 installation guide 04-2014-a i zn1-v4fn3, zn1-v4fn4.

  • Page 2

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 2 precaution please read this manual carefully before installing the units. Never disassemble the main unit and the camera unit. Unauthorized disassembly may cause equipment failure or damage to the unit. Do not install the product on un...

  • Page 3

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 3 safety instruction 1) read these instructions. 2) keep these instructions. 3) heed all warnings. 4) follow all instructions. 5) do not use this apparatus near water. 6) clean only with a dry cloth. 7) do not block any of the ventilatio...

  • Page 4

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 4 table of contents precaution ........................................................................................................................... 2 safety instruction ................................................................

  • Page 5

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 5 1. Features camera pinhole camera 1/3” 1080p cmos image sensor digital day/night digital wdr video h.264 baseline, main, high profile(mpeg-4 part 10/avc), mjpeg(motion jpeg) max 30fps in 1080p text overlay network 10 / 100 base-t ether...

  • Page 6

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 6 2. Package contents please unpack the package carefully and handle the equipment with care. The package contains: camera unit main unit universal plugs power adaptor (12vdc) double-sided tape for covert cover covert cover rotate ring s...

  • Page 7

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 7 3. Part names main unit ① terminal connector connector for cable connection for digital input / output. Refer to “ 5. Connections ” for more details. ② camera connector connector for camera unit ③ microsd slot supports up to 64gb. Clas...

  • Page 8

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 8 camera unit with conjoined accessories ① camera pinhole camera ② camera din connector connector to be inserted to the camera connector on the main unit ③ covert cover bracket to be installed behind the wall or ceiling to hold the camer...

  • Page 9

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 9 4. Installation the installation method of zn1-v4fn3 and zn1-v4fn4 is identical. The installation method of the camera unit differs depending on your bracket type, but the rest of the overall installation process is the same. 4.1. Came...

  • Page 10

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 10 3) peel off the other side of the tape, and stick the taped surface to the installation surface by placing it with the screw head upward and the cable holder downward and aligning it with the drilled hole on the installation surface. ...

  • Page 11

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 11 surface installation for fixed angle 2) cover the camera with the surface mount bracket by routing the camera’s cable into the cable holder on the bracket. Then, fasten the bracket using the tapping screws (m3x20) and anchor blocks ap...

  • Page 12

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 12 surface installation for pan/tilt adjustment 3) insert the rotate ring into the bracket by pressing it into the bracket’s mount ring. 4) place the camera unit on the pan/tilt bracket. 6) use the cable clamp optionally if you want to f...

  • Page 13

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 13 4.2. Main unit installation the main unit can be mounted on the installation surface by the built-in slide plates. 1) pull out both slide plates at the bottom of the main unit. 2) place the main unit on the installation surface by fac...

  • Page 14

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 14 4.3. Setting the image attribute through the camera’s webpage, users can configure image settings. The menu of image attribute is available under video appearance menu in setup > video & audio > camera. The following features can be a...

  • Page 15

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 15 5. Connections di/do terminal connector 1) connect external input/output devices (e.G. Alarm device) optionally if they are necessary. Refer to the reference below for the appropriate connections. Do (alarm) – for connecting an extern...

  • Page 16

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 16 di (sensor) – for connecting a device such as a pir and a door/window sensor. Do the electrical wiring correctly referring to the following information. Di function specifications c ground 1 input 0 to 5 vdc max load: 50ma then, the c...

  • Page 17

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 17 lan connector 3) connect the main unit to the network using an ethernet cable (rj45). Then, install the ferrite core on the ethernet cable. Refer to the explanations below for the ferrite core installation. In case you intend to power...

  • Page 18

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 18 6. Configuration 6.1. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the ...

  • Page 19

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 19 6.1.2. Custom ip environment ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and...

  • Page 20

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 20 6.2. View video on web page type the proper ip address to view the live streaming images through a web browser. The default username and password is root / pass. 6.2.1. Activex installation 1. When the browser asks to install the axum...

  • Page 21

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 21 caution ! 6.2.2. View video using ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. 1. From the ipadmintool’s product list, selec...

  • Page 22

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 22 6.3. Reset perform the following procedures to reset your device: 1. Press the reset button for 2 seconds while the device is in use. 2. Wait for the system to reboot. Caution ! Please do not hold for more than 2 seconds. Otherwise, t...

  • Page 23

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 23 6.5. Safe mode what is safe mode? Your ip camera or encoder could encounter an unexpected occasion such as broken firmware file or uncompleted loading of firmware file during system booting. To restore the device from the occasions, t...

  • Page 24

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 24 note i there is another method to update firmware, which is using ipadmintool. Please refer to ‘ipadmintool user’s manual.Pdf’ for the detailed procedure. Note i if your device is still at safe mode after trying to update firmware, pl...

  • Page 25

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 25 appendix (a): specifications summary camera module cmos image sensor 1/3” 1080p cmos effective pixels 1920 x 1080 scanning system progressive scanning electrical resolution 1920 x 1080 min. Illumination zn1-v4fn4 color: 1.4lux / bw: 0...

  • Page 26

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 26 electrical characteristics power source 12vdc / poe (ieee802.3af ) power consumption 3.6w @ 12vdc video output - audio input - audio output - d/i max 50ma@5vdc, ttl level 1.5v threshold d/o max 50ma@24vdc on-state resistance:50 Ω (max...

  • Page 27

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 27 appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over-ethernet (poe) standard. The ieee 802.3...

  • Page 28

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 28 appendix (c): dimensions [ main unit ] (unit: mm).

  • Page 29

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 29 [ camera unit ] (unit: mm).

  • Page 30

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 30 [ bracket ] (unit: mm) mm mm covert cover mm mm mm mm surface mount bracket pan / tilt bracket.

  • Page 31

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 31 appendix (d): hexadecimal-decimal conversion table refer to the following table when converting the mac address of the device to the ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 ...

  • Page 32

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 32.

  • Page 33

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 33.

  • Page 34

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 34.

  • Page 35

    Pixelpro gxi series zn1-v4fn3/fn4 installation guide 06-2014-b 35 revision history man# date(m/d/y) comments 06-2014-a 06/06/2014 first release version 06-2014-b 06/10/2014 revised screws information.