1. DL manuals
  2. Gaoke
  3. Gateway
  4. mg6008 Series
  5. User Manual

Gaoke mg6008 Series User Manual

Summary of mg6008 Series

  • Page 1

    Mg6000 series media gateway user’s manual guangzhou gaoke communications technology co., ltd..

  • Page 2: User’S Manual

    Radon mg6000 series media gateway user’s manual version: mg6000-iad-sip-08-07-1.0 we are enthusiastic for providing tech support in every way. You can get in touch with gaoke bureau contiguously as well as contact to customer service department directly. Guangzhou gaoke communications technology co....

  • Page 3: Version Declaration

    Version declaration copyright by guangzhou gaoke communications technology company limited. All rights are reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of guangzhou gaoke communications technology company limited. Is th...

  • Page 4: Prolegomenon

    Prolegomenon version instruction this manual is provided for mg6000 series media gateway, which are called as iad. Products included: mg6002(2)、mg6004e、mg6008、mg6008e、mg6016、mg6016e、mg6032、 mg6002et、mg6004et and mg6008et. All these products support sip protocol. Brief introduction of content the man...

  • Page 5: Symbols

    Table 2 appointment of mouse operation operation meanings click press and release a mouse button quickly double click quickly press and release a mouse button twice drag press a mouse button and move the mouse table 3 appointment of keyboard operation style meanings ctrl + c “+”means press multiple ...

  • Page 6: Contents

    Mg6000 series media gateway user’s manual - 1 - contents 1 summary ................................................................................3 1.1 d efinitions and abbreviation .........................................................3 1.2 cli n etwork m anagement ................................

  • Page 7

    Mg6000 series media gateway user’s manual - 2 - 4.1 l og in to the web management system ...................................................23 4.1.1 c onfiguration modes of the web management system ..................................................23 4.1.2 o peration of l ogging in w eb ..............

  • Page 8: 1 Summary

    Mg6000 series media gateway user’s manual - 3 - 1 summary this manual will help you learn how to operate and manage your mg6000 media gateway and make the best use of its many upgraded features including simple and quick installation. 1.1 definitions and abbreviation this document uses the following...

  • Page 9

    Mg6000 series media gateway user’s manual - 4 - 1.3 web network management with the rapid development of modern network communications technology, network communications products is becoming more integrated. In one hand, the functions of equipment are becoming more powerful. But the other hand, it w...

  • Page 10

    Mg6000 series media gateway user’s manual - 5 - 2 introduction of device mg6000 series media gateway are based on ip networks, which supports pppoe 、dhcp protocol and provides an ideal solution for voice and fax transmission. All products support updating firmware online, and can be set by igoview、w...

  • Page 11

    Mg6000 series media gateway user’s manual - 6 - 2.1.2 device front panel fig. 2-2 mg6002(2) front panel as shown in fig. 2-2, the front panel led indicates the working status of mg6002(2), include 2pots, ethernet interface and power led. A) pwr: power indicator light, green. The indicator is on when...

  • Page 12: Appearance

    Mg6000 series media gateway user’s manual - 7 - e) 10/100base-tx: two 10/100base-t ethernet ports, supporting auto-negotiation. The port type is rj-45. The two ethernets could connect to switch or hub by straight line, or connect to the computer by crossover cable. F) rs232 interface: interface type...

  • Page 13

    Mg6000 series media gateway user’s manual - 8 - fig.2-5 appearance of mg6004 et 2.2.2 device front panel fig.2-7 mg6004 et front panel as shown in figure 2-7, mg6004-a’s (et devices before the same panel with the type-a) front panel indicator light shows that the work state, including the four-way f...

  • Page 14: 2.3.1 Appearance

    Mg6000 series media gateway user’s manual - 9 - fig.2-9 mg6004 et back panel fig.2-9 shows external ports on the mg6004-a (the same with et) back panel a) grounding screw: for connecting to the ground; b) power button: power up the device when press the switch, or power down; c) power socket: 2.1mm ...

  • Page 15

    Mg6000 series media gateway user’s manual - 10 - fig.2-11 appearance of mg6008 et 2.3.2 device front panel the front panel of each type of mg6008 is different, shown as follows: fig.2-12 mg6008 s front panel fig.2-13 mg6008 front panel as shown in fig 2-13, the front panel indicator shows the workin...

  • Page 16

    Mg6000 series media gateway user’s manual - 11 - fig.2-14 mg6008 et front panel the front panel indicator shows the working state of a-type mg6008(the front panel layout of type et is the same with type a except the color, the color of type et is blue), including pots interface of 8 fxs pots and the...

  • Page 17: 2.4.1 Appearance

    Mg6000 series media gateway user’s manual - 12 - fig.2-17 mg6008 et back panel fig.2-17 shows mg6008 et back panel. A) grounding screw: for connecting to the ground; b) power button: power up the device when press the switch, or power down; c) power socket: 2.1mm small ac outlet, +12v dc power suppl...

  • Page 18: 2.5.1 Appearance

    Mg6000 series media gateway user’s manual - 13 - c) lnk1 and link2: no. 1 and no.2 ethernet connect / data receiving indicator, green. Being on when the connecting is normal, or off, flashing when receiving data; d) lnk3: no. 3 ethernet connecting indicator, green. Being on when the connecting is no...

  • Page 19

    Mg6000 series media gateway user’s manual - 14 - fig.2-21 appearance of mg6032 2.5.2 device front panel the style is the same with mg6016/24 front panel, shown as fig.2-22. Fig.2-22 front panel the front panel indicator shows the working state of mg6032, including pots interface of 32 fxs or fxo. A)...

  • Page 20

    Mg6000 series media gateway user’s manual - 15 - 2-layer string speed switch function lies in the two ports . Each ethernet port has two indicators,the lights will be on when powered and blink when transfer data; g) line interface: two escape interface, rj-11, the interface keeps no.1 line in mg6032...

  • Page 21

    Mg6000 series media gateway user’s manual - 16 - 3 prepare for management 3.1 change ip address of device the default ip address of mg6002 (2), mg6008, mg6016, mg6016e, mg6032, mg6002et, mg6004et and mg6008et is 138.0.60.1. Because if the equipment ip address and network management computer ip addre...

  • Page 22

    Mg6000 series media gateway user’s manual - 17 - fig.3-2 configuration of ip address 3.1 ie settings for web network management suggest subscribers to set ie browser parameters by instructions. The configuration of web browser is as following (take ie 5.0 for example). 3.1.1 security configuration c...

  • Page 23

    Mg6000 series media gateway user’s manual - 18 - fig 3-3 security configuration check “script” configuration, and make sure that “java applet” and “active script” are all “strart” status. It’s shown as fig 3-4. Fig 3-4 script security configuration 3.1.2 lan configuration when user access equipment ...

  • Page 24

    Mg6000 series media gateway user’s manual - 19 - fig 3-5 internet options fig 3-6 lan settings if ip address of pc and the mg6008 belong to the same subnet, this section can be ignored. Subscriber should ask the network administrator if it need setting proxy server. 3.1.3 access configuration in ord...

  • Page 25

    Mg6000 series media gateway user’s manual - 20 - fig 3-7access configuration 3.2 cli management configuration and login 3.2.1 cli configuration the most convenient configuration environment is shown as fig 3-8. Iad and computer are connected by ip network directly. 3 com li nk swit ch 3 00 0 mg6008 ...

  • Page 26

    Mg6000 series media gateway user’s manual - 21 - 3.2.3 connect and login through serial port connect computer and iad with rs232 interface, and use hyper terminal software as command operation interface to implement access and configuration. Including ip address parameter, take mg6008 as the example...

  • Page 27

    Mg6000 series media gateway user’s manual - 22 - 3.2.4 connect and login through ethernet line make sure that iad and computer are all connecting to the same lan first. Or connected by cable (direct/cross connect) directly, a nd host ip address and device is in the same subnet. For windows system，it...

  • Page 28

    Mg6000 series media gateway user’s manual - 23 - 4 configuration by web browser 4.1 log in to the web management system 4.1.1 configuration modes of the web management system there is only one configuration mode in the web management system. Users can complete all the configurations in one ie window...

  • Page 29

    Mg6000 series media gateway user’s manual - 24 - management system. For example, if the ip address of the wan port is 138.0.60.1, and we connect the computer and the iad by the wan port, the ip of the computer can be set to 138.0.0.221, the net mask can be set to 255.255.0.0; d) the device has two d...

  • Page 30

    Mg6000 series media gateway user’s manual - 25 - figure 4-3 “device info” page this is the first screen when we log in the web management system. User can view the current information in it, includes device name、product revision、revision date、dsp version、sip version、static ip info、pppoe client info、...

  • Page 31

    Mg6000 series media gateway user’s manual - 26 - . Figure 4-4 user manage after modifying the password, you must saved the current configuration and restart the iad. Attention: a). Upper level users could modify the password of lower level users; b). User could modify password but not user name; c)....

  • Page 32

    Mg6000 series media gateway user’s manual - 27 - figure 4-5 page of basic network parameter configuration all kinds of users could enter this page; all the users have the authorization to configure except common users. L static ip after modifying ip address，current configuration must be saved, and t...

  • Page 33

    Mg6000 series media gateway user’s manual - 28 - user can preview the information of dhcp client on the page of “device info”. Attention： a). If dhcp client get ip address successfully, thestatic ip of wan port will be replaced by the dynamicip address which the dhcp client get. If user wants to log...

  • Page 34

    Mg6000 series media gateway user’s manual - 29 - figure 4-6 the page of “advanced network configuration” all kinds of users could enter this page; all the users have the authorization to configure except common users. L dhcp server after modifying the parameter of dhcp server，current configuration m...

  • Page 35

    Mg6000 series media gateway user’s manual - 30 - with the lan port of iad. B). If iad’s dhcp server and pppoe client are used at the same time, the primary dns sever address and the slave dns sever address which the dhcp server provides for the dhcp clients, will be instead by the primary dns sever ...

  • Page 36

    Mg6000 series media gateway user’s manual - 31 - in this page, the parameters as following can be configured. A) enable 802.1x service or not: the parameters below can not be configured until enable the 802.1x service; b) user name: provided by 802.1x isp. C) user password: provided by 802.1x isp. L...

  • Page 37

    Mg6000 series media gateway user’s manual - 32 - iad. L audio codec set voice as itu-t codec algorithm standards. Iad support g.711a, g.711u, g.723, g.729, and g.726 (16k, 24k, 32k, and 40k). User could choose one or more audio codec modes and set their nob. One of the algorithms must be assigned as...

  • Page 38

    Mg6000 series media gateway user’s manual - 33 - expect to send and receive. Value range is 0 db to 127. D) busytone gain, busytone frequency, duration/interval: these parameters need to be configured when iad connect with pbx. Iad will detect the busy tone of pbx by the busytone parameters, and rel...

  • Page 39

    Mg6000 series media gateway user’s manual - 34 - figure 4-8 the page of sip parameter configuration all kinds of users could enter this page; all the users have the authorization to configure except common users. After modifying the parameter ofmedia stream，current configuration must be saved, and t...

  • Page 40

    Mg6000 series media gateway user’s manual - 35 - c) t1 timer: value rage is 100ms to 65535ms. The default value is 500ms; d) t2 timer: value rage is 100ms to 65535ms. The default value is 4000ms; e) t4 timer: value rage is 100ms to 65535ms. The default value is 5000ms. 4.2.5.2 sip advance click “sip...

  • Page 41

    Mg6000 series media gateway user’s manual - 36 - f) enable global number support: when select this, device will add “+” in front of the called number. G) no audio when faxing: this configuration only has meaning when user selects the t.38 fax mode. If be selected, the session invite will not carry t...

  • Page 42

    Mg6000 series media gateway user’s manual - 37 - 4.2.7 line config 4.2.7.1 line config click “line config” to enter the page shown as figure 4-10. Figure 4-10 the page of line config all kinds of users could enter this page; all the users have the authorization to configure except common users. The ...

  • Page 43

    Mg6000 series media gateway user’s manual - 38 - figure 4-11 the page of line modify super user and senior user could enter this page except common user. Super user and senior user also have the authorization to configure. A) phone config continuous: provides a fast method to set the continuous phon...

  • Page 44

    Mg6000 series media gateway user’s manual - 39 - (incoming) is itself by default. G) transfer port (outgoing): for fxs port, transfer port (outgoing) can not be configured as other fxs ports but itself. H) startup incoming number echo: support number display or not. Default is yes. I) startup callin...

  • Page 45

    Mg6000 series media gateway user’s manual - 40 - fig 4-12number mapping all kinds of users could enter this page; all the users have the authorization to configure except common users. All the digit map parameters which had been modified, will take effect immediately but make sure the modified param...

  • Page 46

    Mg6000 series media gateway user’s manual - 41 - 4.2.8.2 add number route mapping click “add” to add routing map. This page is shown as below. Fig. 4-13 add route map all kinds of users could enter this page; all the users have the authorization to configure except common users. All the digit map pa...

  • Page 47

    Mg6000 series media gateway user’s manual - 42 - 4.2.8.3 delete the items of number route mapping users can delete the items through clicking the “delete” button after selecting the row that will be deleted. Multi records can be deleted in series. Attention： a). When delete several route once, the i...

  • Page 48

    Mg6000 series media gateway user’s manual - 43 - fig 4-14 route parameter all kinds of users could enter this page; all the users have the authorization to configure except common users. The parameter that had been modified will take effect after saving and resetting. The parameter shown as below: l...

  • Page 49

    Mg6000 series media gateway user’s manual - 44 - once. Click the “digit map”, and the “digit map” page will appear, page shown as 4-16（take mg6008 for example） fig. 4-15 digit map page all kinds of users could enter this page; all the users have the authorization to configure except common users. Al...

  • Page 50

    Mg6000 series media gateway user’s manual - 45 - automatically • 011xxx.T: international rule without prefix • 91[2-9]xxxxxxxxx: ld rule with prefix • [1-8]xx: a regular 3 digit extension is dialed immediately l construct the route by digit map digit map is a form of route configuration, so the rout...

  • Page 51

    Mg6000 series media gateway user’s manual - 46 - fig. 4-17 page of value-add configuration all kinds of users could enter this page; all the users have the authorization to configure except the common users. The modified parameters of value-add will take effect after saving and resetting. The parame...

  • Page 52

    Mg6000 series media gateway user’s manual - 47 - when one phone a is ringing and there is no one to answer it, the extension b which is connected with the same iad can snatch this call through pressing button ‘*’ and dialing the number of a. L call hold suppose a is one using the call hold function,...

  • Page 53

    Mg6000 series media gateway user’s manual - 48 - in the process of communication, a taps, and it will receive the dial-up signal or prompt voice, and presses button ‘4’, then dials number of c, a will sent the refer signal to the server, after the server had processed the refer signal, a will receiv...

  • Page 54

    Mg6000 series media gateway user’s manual - 49 - 4.2.11 vlan configuration click “vlan config” to enter this page shown as fig 4-20, and the vlan configuration parameters of the iad is that make up of vlan through wan port and lan port, there are total of four forms of vlan in iad, which are route m...

  • Page 55

    Mg6000 series media gateway user’s manual - 50 - fig. 4-19 vlan port of ethernet the modes of vlan show as below. L route mode there are two forms in route mode, which is “add tag” and “not add tag”. 1). Route mode – not add tag lan port and internal port 4 make up of vlan a, and wan port and intern...

  • Page 56

    Mg6000 series media gateway user’s manual - 51 - the packets that transmit between wan port and internal port 2 do not add tag. Vlan c the packets that transmit between lan port and internal port 4 do not add tag. 2). Bridge mode –data don’t add tag, voice add tag wan port and lan port and internal ...

  • Page 57

    Mg6000 series media gateway user’s manual - 52 - fig. 4 – 20 system tool all kinds of users could enter this page; super user have the authorization to configure all in this page, senior users have the authorization to configure “save current settings”, “load last settings saved from flash”, “reset ...

  • Page 58

    Mg6000 series media gateway user’s manual - 53 - fig. 4-21 backup the configuration attention：start tftp server and select the directory on the pc before tftp operation. Tftp server could be found in accessory cd; before backup the configuration file, you should specify the ip address of tftp server...

  • Page 59

    Mg6000 series media gateway user’s manual - 54 - fig 4-22 update by http attention： a). When reset the iad to factory default configuration, some parameters will take effect after the device restarts. B). Network management needs to connect with the device again after the device restarts. C). Start ...

  • Page 60

    Mg6000 series media gateway user’s manual - 55 - 5 mg6000 series cli network management operation following introduced cli commands is only applicable the device, such as mg6002 (2), mg6004e, mg6008, mg6008e, mg6016, mg6016e, mg6032, mg6002et, mg6004et and mg6008et8. Those products compose the serie...

  • Page 62

    Mg6000 series media gateway user’s manual - 57 - mac address: 00:03:0a:0b:0c:0d default gateway ip address: 192.168.0.221 5.1.4.2 dhcp client parameters a). Configuration iad(8)#set dhcpclient -> enable dhcp client ?'yes' or 'no'[no]:yes -> use special dhcp server? 'yes' or 'no'[no]:yes -> special d...

  • Page 63

    Mg6000 series media gateway user’s manual - 58 - client ip address: 138.0.221.81 server ip address: 10.0.0.1 master dns ip address: 61.144.56.101 slave dns ip address: 202.96.128.166 debug information output: no 5.1.4.4 dhcp server parameters attention: only the et type of iad can be used as the dhc...

  • Page 64

    Mg6000 series media gateway user’s manual - 59 - attention： master dns server address and secondary dns address can be specified to the same or different address. If enable the dns server, the master dns server address must be specified, but the secondary dns server could be disable. 5.1.4.6 ntp par...

  • Page 65

    Mg6000 series media gateway user’s manual - 60 - b). Display iad(8)#show stun enable stun stun server domain name:cyndi.Gktel.Cn stun server ip addres:0.0.0.0 stun server port:3478 attention： a). Simple traversal of udp over nats is a lightweight protocol that allows applications to discover the pre...

  • Page 66

    Mg6000 series media gateway user’s manual - 61 - ->is it need outputing data information for debugging ? 'yes' or 'no'[no]: ->is it need outputing trace information for debugging ? 'yes' or 'no'[no]: ->is it need outputing error information for debugging ? 'yes' or 'no'[no]: attention： a). For this ...

  • Page 67

    Mg6000 series media gateway user’s manual - 62 - -> port 4 permission(0-closed,1-limited,2-city,3-domestic,4-macao/hk/taiwan,5-international) [5]:5 -> port 5 need phone receipt 'yes' or 'no' [yes]: -> port 5 permission(0-closed,1-limited,2-city,3-domestic,4-macao/hk/taiwan,5-international) [5]:0 -> ...

  • Page 68

    Mg6000 series media gateway user’s manual - 63 - ->enable sce?'yes'or'no'[no]: ->enable g.711alaw codec?'yes'or'no'[yes]: ->nob (10 or 20):[20]: ->enable sce?'yes'or'no'[no]: ->enable g.729 codec?'yes'or'no'[yes]: ->nob (1 or 2)[2]: ->enable sce?'yes'or'no'[no]: ->enable g.726_16 codec?'yes'or'no'[y...

  • Page 69

    Mg6000 series media gateway user’s manual - 64 - b). The default algorithm must be specifyed, user can config the frame counts and enable sce or not for each audio codec algorithm. 5.1.6.2 dsp parameters –voice, signal tone and fax a). Configuration iad(8)#set dsp -> startup echo canceller?'yes' or ...

  • Page 70

    Mg6000 series media gateway user’s manual - 65 - modified configuration anyway ?'yes' or 'no'[yes]:yes b). Display iad(8)#show dsp counts of dsp: 2 echo canceller: enable sce: disable input gain: -1db output gain: -1db dtmf gain: -4db max fax rate: 5 - 14400bps fax mode: 0 -- t38 redundancy for fax ...

  • Page 71

    Mg6000 series media gateway user’s manual - 66 - -> correct remote rtp port auto?'yes'or'no'[no]:no b). Display iad(8)#show frame-buff frame counts in each trp packet: 1 max rtp packets in buffer: 5 config redundancy for rtp: 0 correct remote rtp port auto: no 5.1.6.5 qos parameters –voice,fax and s...

  • Page 72

    Mg6000 series media gateway user’s manual - 67 - ->really want to modify?'yes'or'no'[yes]:yes attention： a).One or both of the two parameters(register server address and hostname of register server) is needed. They cannot be null together, enter 0 to clear them. The suggested value of the register s...

  • Page 73

    Mg6000 series media gateway user’s manual - 68 - 1 -- header 2 -- session 3 -- user 4 -- none 5 -- critical 6 -- id ->please choose the type of privacy(0-6)[0]: precondition type: 0 -- disabled 1 -- segment 2 -- e2e ->please choose the type of precondition(0-2)[0]: ->your configuration will apply wh...

  • Page 74

    Mg6000 series media gateway user’s manual - 69 - avoid the mistake of losing iad because of the long register interval. The default value is disabled c). According to demand platform, set the advanced parameters of sip d). The sip advanced parameters which had be modified will take effect after savi...

  • Page 75

    Mg6000 series media gateway user’s manual - 70 - ->snmp server port(0-65535)[162]:162 ->enable double register snmp server'yes'or'no'[no]:no ->snmp special server port(0-65535)[53]:53 ->the interval of trap message(2-60)[60 s]:60 ->the interval of trap update message(5-3600)[60 s]:60 ->iad system lo...

  • Page 76

    Mg6000 series media gateway user’s manual - 71 - caller's number and etc. Local phonebook setting is used to config the user interface of mg6000, the user port of mg6000 may be fxs or fxo. Mg6000 not only can connect the traditional phone, but also can connect the pbx by fxs/fxo. Currently, we just ...

  • Page 78

    Mg6000 series media gateway user’s manual - 73 - ----+----+------------------------------+----+----+----+--------+-----------+ 5.1.9.2 call forward a). Configuration iad(8)#set callforward ->please choose port:(0-7)[0]: ->enable callforward function?'yes'or'no'[no]:yes ->enable unconditional callfor...

  • Page 79

    Mg6000 series media gateway user’s manual - 74 - unconditional callforward function: disable! When busy callforward function: disable! When no answer callforward function: enable! When no answer callforward number: 82598625 timer for no answer callforward: 2000*10ms 7 port's callforward function: en...

  • Page 80

    Mg6000 series media gateway user’s manual - 75 - port number port type grouping-nu 0 fxs 210 0 1 fxs 211 0 2 fxs 212 0 3 fxs 213 1 4 fxs 214 1 5 fxs 215 1 6 fxs 216 2 7 fxs 217 2 5.1.9.4 authentication and registration – user name and password of port a). Configuration iad(8)#set sipuser ->enter por...

  • Page 82

    Mg6000 series media gateway user’s manual - 77 - configuration. B). “set local-pots” the cli command is used to configure the “prefix” , “port number” and “register or not”, and another command “set sipuser” is used to configure the username and the password of authentication and registration. 5.1.9...

  • Page 83

    Mg6000 series media gateway user’s manual - 78 - 5 fxs unchanged 6 fxs unchanged 7 fxs modified 1 020 5.1.10 number routing number’s route table’s longest length is 100, and it is mainly used when there is no gatekeeper, the capacity can basically satisfy the user needs. Mg6008 routing supports two ...

  • Page 87

    Mg6000 series media gateway user’s manual - 82 - b). Display iad(8)#show extended-service use '#' key as dial out(0-no, 1-yes): 1 use '*' key for special function (0-no, 1-yes): 0 if tap key need to send up(0-no, 1-yes): 0 if special key use escape sequence(0-no, 1-yes): 0 snatch function: enabled s...

  • Page 88

    Mg6000 series media gateway user’s manual - 83 - -->choose route type{0:don't add tag; 1:add tag}[0]: 0 -->config vlan success! B). Display iad(8)#show vlan -->vlan mode: route mode -->route type: don't add tag 2. Route type –add tag a). Configuraion iad(8)#set vlan vlan mode: 0------route mode 1---...

  • Page 89

    Mg6000 series media gateway user’s manual - 84 - a). Configuration iad(8)#set vlan vlan mode: 0------route mode 1------bridge mode 2------custom mode 3:vlan disable please choose vlan mode[1]: 1 bridge type: 0------:don't add tag 1------data don't add tag,voice add tag 2------data and voice add tag ...

  • Page 90

    Mg6000 series media gateway user’s manual - 85 - a). Configuration iad(8)#set vlan vlan mode: 0------route mode 1------bridge mode 2------custom mode 3:vlan disable please choose vlan mode[1]: 3 -->vlan disable b). Display iad(8)#show vlan -->vlan mode: disable attention：vlan configuration parameter...

  • Page 92

    Mg6000 series media gateway user’s manual - 87 - the config file name:sip6008etv385.Img 5.1.14.6.2 start to down load by http a). Configuration iad(8)#set httpdownload-start http content length is 2068532 2067168 bytes downloaded http recv task over,length is 2068532 bytes flash writing... Wait a mo...

  • Page 93

    Mg6000 series media gateway user’s manual - 88 - set web show web set pbx-para show pbx-para show pots-status set lo show pots-status show history 5.1.17 return to user mode a). Configuration iad(8)#disable iad(8)> 5.1.18 modify the common user ‘s password a). Configuration iad(8)#set password user ...

  • Page 94

    Mg6000 series media gateway user’s manual - 89 - 5.1.20 enable web managing tool or not mg6000 network management system supports web network management, convenient for remote management and setting。but because the socket port 80 of web is a famous port，it can easily be attacked in network. So wheth...

  • Page 95

    Mg6000 series media gateway user’s manual - 90 - 6 appendix a trap parameter table series of mg6000 media gateway haven’t trap parameter setting until now.

  • Page 96

    Mg6000 series media gateway user’s manual - 91 - address: building gaoke, no.398 mid zhongshan ave., guangzhou, p.R.C p.C.: 510660 website: www.Gktel.Cn.