1. DL manuals
  2. Garden Gear
  3. Lawn and Garden Equipment
  4. M1E-LD-115
  5. Instruction Manual

Garden Gear M1E-LD-115 Instruction Manual

Manual is about: Hedge and Edge Trimming Shears

Summary of M1E-LD-115

  • Page 1

    1 hedge and edge trimming shears: model m1e-ld-115 instruction manual for correct usage, read these instructions carefully and keep in a safe place for future reference..

  • Page 2

    2 introduction introduction introduction introduction the hedge and edge trimming shears are only intended for domestic light trimming of garden hedges, shrubs and lawn edges. The trimming shears are not suitable for commercial purposes, and any such use will void the guarantee. Description of parts...

  • Page 3

    3 safety safety safety safety precautions precautions precautions precautions explanation of symbols: warning notice read the instruction manual. Do not expose the tool to rain. Warning! The cutting blades continue to move after switching off. Warning! Keep bystanders away. Only use the battery char...

  • Page 4

    4 warning! • before adjusting or cleaning the trimming shears, make sure that they are switched off first. • when in use keep your hands well away from the moving blades. • when switching the trimming shears off, keep your hands well away from the blades, as they will continue to turn for a short ti...

  • Page 5

    5 electrical safety • make sure the power rating on the plug matches the outlet. • never modify the plug in any way. • do not use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. • to prevent the risk of electric shock, ...

  • Page 6

    6 • remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. • to maintain full control of the tool, keep a proper footing at all times with your weight evenly balanced over both feet and ...

  • Page 7

    7 • always disconnect the machine from the power supply whenever the following conditions apply: - whenever leaving the tool unattended. - before clearing a blockage. - before checking, cleaning or working on the unit. - after striking a foreign object. - whenever the tool starts vibrating abnormall...

  • Page 8

    8 delivered items delivered items delivered items delivered items carefully remove the tool from its packaging and check that the below contents are included: • shear with grass shear blade assembled. • trimming blade. • blade guards (for both grass and trimming shear blades). • battery charger. • o...

  • Page 9

    9 2. Making sure the wall outlet in your home is normal household voltage (ac230v, 50hz); insert the battery charger plug into the mains power supply. • during the charging process, the handle of the tool will warm up, but this is perfectly normal. • when not using the tool for extended periods, dis...

  • Page 10

    10 trimming shear blade use the trimming blade for trimming and shaping hedges, shrubs and bushes. Cutting shrubs • before cutting, check the shrubs for foreign objects e.G. Wire. • when using the tool hold it away from yourself and stand in a secure position with your weight evenly balanced over bo...

  • Page 11

    11 changing blades changing blades changing blades changing blades wear gloves when changing blades. Blades can cause injury. Do not press the safety lock of the shear during blade changes. Removing (fig. 3-6) • slide your thumb under the sds blade changing release switch (8) and then slide the cove...

  • Page 12

    12 fitting (fig. 7-8 • fit the blade, by aligning the holes in the blade onto the drive pins. (fig.7). • when refitting the sds blade cover, ensure all 4 legs are inside the housing before sliding the cover into place. • replace the blade cover, by sliding it back towards the blade (fig.8). Fig.7 fi...

  • Page 13

    13 blade maintenance blade maintenance blade maintenance blade maintenance blades can cause injury. Do not press the safety lock of the shear during maintenance work. Never clean the trimming shears in water (especially running water), as there is a risk of personal injury and damage to the shears. ...

  • Page 14

    14 re-sharpening the grass shear blade (fig.9): 1) remove the blade from the shear. 2) separate the upper blade (12) and lower blade (13) (fig.9). 3) remove any grass and dirt between the upper and lower blades. 4) sharpen the blades by using a sharpening stone. 5) fit the blades on the shear. Fig.9...

  • Page 15

    15 product specification product specification product specification product specifications s s s model m1e-ld-115 battery type lithium battery pack voltage dc 3.6v battery pack capacity 1300mah battery type lithium-ion no load speed 900rpm grass shear blade cutting width 80mm trimming blade cutting...

  • Page 16

    16 declaration of conformity declaration of conformity declaration of conformity declaration of conformity declaration of conformity we clifford james gladden place west gillibrands skelmersdale wn8 9sx england declare that the hedge and edge trimming shears model m1e-ld-115 conforms with the follow...

  • Page 17: Guarantee

    17 guarantee important please do not return this product without first calling the customer service number below: 0870 888 1008 thank you for purchasing this product, which has been made to demanding high quality standards and is guaranteed for domestic use against manufacturing faults for a period ...