1. DL manuals
  2. Garden Oasis
  3. Lawn and Garden Equipment
  4. GFM00110B
  5. Owner's Manual

Garden Oasis GFM00110B Owner's Manual

Manual is about: 11 x 11 ft Curved Pergola

Summary of GFM00110B

  • Page 1

    02628062-8 805670024222 11 ft x 11 ft curved pergola product code: d71 m83028.

  • Page 2: Important

    Sears insists on the highest standards of furniture. Each piece has been carefully inspected before shipment. In case of problem, do not return to the store, call yotrio corporation at phone# 1-866-905-4107 between the hours of 8:30 am to 5:00 pm pst, monday through friday, for any questions or prob...

  • Page 3

    Parts list parts no. Qty description name 1 11 x 11 ft curved pergola assembly instructions gfm00110b a b c d e f g h i j k l m 1 pc 1 pc 1 pc 1 pc 2 pcs 2 pcs 2 pcs 2 pcs 2 pcs 2 pcs 2 pcs 4 pcs 12 pcs tow rope crossbeam 1 tow rope crossbeam 2 top tube bending tube 1 bending tube 2 side bending tub...

  • Page 4

    Parts list parts no. Qty description name 2 11 x 11 ft curved pergola assembly instructions gfm00110b n o p q r s t u v w x y z 72 pcs 10 pcs 8 pcs 2 pcs 1 pc 4 pcs 2 pcs 2 pcs 2 pcs 2 pcs 6 pcs 4 pcs 16 pcs m6*16 nuts & bolts m6*35 nuts & bolts m6*72 nuts & bolts rope holder top tube connector base...

  • Page 5

    11 x 11 ft curved pergola assembly instructions gfm00110b 3 step 1: insert side bending tube 1 (f) into side bending tube 2 (g), then align all bolt holes and fasten by using m6*16 nuts & bolts (n). Step 2: insert bending tube 1 (d) into bending tube 2 (e), then align all bolt holes and fasten by us...

  • Page 6

    11 x 11 ft curved pergola assembly instructions gfm00110b 4 step 3: put the tube joint of tow rope crossbeam 1 (a) and tow rope crossbeam 2 (b) close to top tube (c), then embed top tube connector (r) into joint and fasten by using m6*16 nuts & bolts (n). Step 4: put the final assembled bending tube...

  • Page 7

    5 11 x 11 ft curved pergola assembly instructions gfm00110b step 7: unfold the replacement canopy (k), insert the tube joint on canopy (k) one with another. Then put it close to top tube (c) and tighten by using m6*35 nuts & bolts (o). O o o o step 8: insert the sliding tube (x) into the replacement...

  • Page 8

    6 11 x 11 ft curved pergola assembly instructions gfm00110b step 9: lay the sunshade (j) onto the top of the pergola. Line up the bolt holes on the sunshade with corresponding holes on the top, then screw in the m6*16 nuts & bolts (n). 9 n n n n n n j j j j f g k.

  • Page 9

    7 11 x 11 ft curved pergola assembly instructions gfm00110b step 10: 1). Embed decorative base 1 (t) and decorative base 2 (u) into tow rope leg tube (h) and leg tube (i) respectively, then screw in the m6*16 nuts & bolts (n). 2). Align all bolt holes on base (s) with corresponding bolt holes on leg...

  • Page 10

    8 11 x 11 ft curved pergola assembly instructions gfm00110b step 11: 1). Lift the whole top and make sure all leg tubes are in place. Align all bolt holes on the top tube with corresponding bolt holes on leg tube h and i and screw together by using m6*16 nuts & bolts (n) and m6*72 nuts & bolts (p). ...

  • Page 11

    11 x 11 ft curved pergola assembly instructions gfm00110b step 13: insert the ground spike (y) into the corresponding holes on the base (s) to fix leg tubes. 9 13 s y see our extensive assortment of outdoor living products on-line at www.Sears.Com and www. Kmart.Com..

  • Page 12

    Please keep this page for your records. Caring for steel frames though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches, lightly sand the affected area and apply touch-up paint. Periodically treat frames with a l...