Garden Treasures Living SS-909E-1N User Manual - page 5
M6 x 45 L bolt
M6 nut
M6 washer
“S” hook
M6 bolt cap
M6 nut cap
M6 x 40L bolt
M8 x 45L bolt
M6 washer
M8 washer
M6 bolt cap
4) Align the two holes in the bottom of the
Left Arm (G) with the two holes in the
left side of the Sling Seat (H). For each hole,
insert an M8 x 45 L Bolt (EE) through an M8
Metal Washer (JJ), through the arm and
into the sling seat crossbar. Do not tighten
completely. Repeat this procedure on the
other side of the sling seat using the
Right Arm (F). See Fig. 4.
5) Place the Sling Back (I) between (F & G),
lining up the holes on the sides. For each
hole, insert an M6 x 40 L Bolt (AA) through
an M6 Metal Washer (II), through back of
the arm and into (I). Do not tighten completely.
Repeat this procedure on the other side of the
sling back to attach the other arm. See Fig. 5.
6) Align the hole at one end of a Short
Hanging Bar (L) with the sleeve under
the front of the arm. From the inside,
insert an M6 x 45 L Bolt (BB) through the
sleeve, through the short hanging bar,
through an M6 Washer (II) and into an
M6 Nut (GG). Do not tighten completely.
Attach the Long Hanging Bar (M) to the
back of the arm using the same procedure.
Attach remaining two hanging bars to the
other arm in the same way. See Fig. 6.
7) At each end of the seat assembly, bring
the holes in the free ends of the hanging
bars together and thread them onto an
“S” Hook (MM). Hang the “S” hooks and
seat assembly from the loops on the top
frame bar. See Fig. 7.
Fig. 6
SEAT ASSEMBLY
HANGER ASSEMBLY
Fig. 7
Description
Part
Quantity
Picture
Hardware Used
M8 bolt cap
Description
Part
Quantity
Picture
Hardware Used
OO
EE
JJ
OO
EE
JJ
NN
AA
II
NN
AA
II
F
H
I
G
Fig. 4
Fig. 5
AA
EE
II
JJ
NN
II
PP
GG
II
BB NN
I
L
M
MM
MM
NN
BB
II
GG
PP
OO
x 4
x 4
x 4
x 4
x 4
x 4
x 4
x 4
x 4
x 2
x 4
x 4