Gardena ® art. 1243 d gebrauchsanweisung funkzentrale gb operating instructions central radio control unit f mode d’emploi télécommande nl gebruiksaanwijzing afstandsbediening met houder i istruzioni per l’uso centralina radio-trasmittente.
19 g intended use gardena central radio control unit welcome to the garden of gardena... Please read these operating instructions carefully and observe the notes given. Use these instructions to familiarise yourself with the central radio control unit, its correct use and the notes on safety. For sa...
21 g 20 g 3. Key functions and display key functions key function 1 ▲ /▼ for changing or advancing specific data already entered. (if you hold down one of the ▲-▼ keys the display runs through the hours or minutes, for example, more quickly.) 2 ok confirms the values set using the ▲-▼ keys. 3 reset ...
23 g 22 g the 3 display levels main level time level programme level changing the display level : v press the menu + key. The display changes to the next level. If you do not press another key within 2 minutes, the main level appears automatically on the display. 4. Quick reference operating instruc...
25 g 24 g 6. Labelling irrigation valves and radio switch v label the irrigation valves and radio switches using the stick- ers provided with the irrigation valves. Match them to the corre- sponding channels on the control plan. This ensures that the channels are assigned to the radio receivers and ...
27 g 26 g setting the watering days : (a) every 2 nd or 3 rd day (from current day) (b) select any day (daily watering possible) 7. (a) every 2nd or 3rd day : set the arrow l to 2 nd or 3 rd using the ▲-▼ keys (e.G. 2 nd l = every 2nd day) and confirm by pressing the ok key. The watering days (e.G. ...
29 g 28 g 8.5 cancelling receivers 1. Press the setup key (e.G. Using the tip of a pen). Setup is displayed and the free channels flash on the display. 2. Press the menu + key (display / register receivers). An arrow v is displayed before the first registered receiver 11 . (e.G. 11 = first receiver,...
31 g 30 g 3. Set the arrow v to the sensor you require (e.G. V 7 = sensor 7) using the ▲-▼ keys and assign the sensor to the channel (e.G. V ■ 7) by pressing the ok key. 4. Once you have assigned all the sensors you require (e.G. ■ 1 and ■ 7), to the channel (e.G. Channel 99 ) press the menu +. The ...
33 g 32 g 9. Trouble-shooting fault possible cause remedy radio receiver cannot be the batteries are not installed v install the batteries as de- registered correctly in the battery compart- scribed in the radio re- ment. Ceiver operating instructions. The unit reset itself a brief power cut occurre...
35 g warranty product liability eu certificate of conformity the undersigned gardena kress + kastner gmbh · hans-lorenser-str. 40 · d-89079 ulm hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the harmonised eu guidelines, eu standards of safety and pro...
91 90 receiver channels prog start-time run -time 3rd 2nd mo tu we th fr sa su sensors receiver channels prog start-time run -time 3rd 2nd mo tu we th fr sa su sensors.
Deutschland gardena kress + kastner gmbh gardena service hans-lorenser-straße 40 d-89079 ulm produktfragen: (07 31) 490 - 123 reparaturen: (07 31) 490 - 290 argentina argensem s.A. Venezuela 1075 (1618) el talar - buenos aires australia nylex corporation ltd. 25 - 29 nepean highway p.O. Box 68 mento...
