1. DL manuals
  2. Gardena
  3. Lawn and Garden Equipment
  4. 19032
  5. Operator's Manual

Gardena 19032 Operator's Manual

Manual is about: smart Irrigation Control

Summary of 19032

  • Page 1

    En operator’s manual smart irrigation control art. 19032 en.

  • Page 2

    1. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 3: Intended Use:

    Original instructions. For safety reasons, children and young people under 16 as well as anyone who is not familiar with these operating instructions should not use the product. Persons with reduced physical or mental abilities may use the product only if they are supervised or instructed by a respo...

  • Page 4: 1. Safety

    1. Safety important! Read the operator’s manual carefully before use and keep for future reference. Electrical safety danger! Cardiac arrest! This product makes an electro­ magnetic field while it operates. This field may under some con­ ditions interfere with active or passive medical implants. To ...

  • Page 5

    Protect the product from direct sunlight. Be careful when touching the valves! Metal parts can heat up. 5 en.

  • Page 6: 2. Assembly

    2. Assembly to assemble the irrigation control on the wall: the both screws and dowels are in the skope of delivery. The distance between the holes is 120 mm. (1) 1. Remove the cover (1) . 6 en.

  • Page 7

    24 vac valves s/n: 00000000 master 1 2 3 4 5 6 c c m top reset 5s 120 mm 2. Mark the positions of the holes. To do this, hold the irrigation control against the wall, bring it straight and mark 2 holes at a distance of 120 mm. 3. Drill the holes and assemble the irrigation control to the wall with t...

  • Page 8: 3. Installation

    3. Installation to remove the cable strain relief: 24 vac valves s/n: 00000000 top reset 5s master 1 2 3 4 5 6 c c m (4) (3) v loosen both screws (3) and remove the cable strain relief (4) . 8 en.

  • Page 9: Connection Overview:

    Connection overview: 1 2 3 4 5 6 c c c c 1 2 3 4 5 6 c c c c 24 vac valves s/n: 00000000 top reset 5s master 1 2 3 4 5 6 c c m 24 vac power supply pump control v1 v2 v3 (art. 1278) (art. 1278) (art. 1255) (art. 1278) v4 v5 v6 (art. 1278) (art. 1278) (art. 1278) (art. 1255) valve box art. 1255 valve ...

  • Page 10

    To connect the valves to the valve box: make sure that the terminal block has been correctly installed in the valve box. ! 1 2 3 4 5 6 c c c c v1 v2 v3 (art. 1278) (art. 1278) (art. 1278) v label the valves (1 – 6) with the yellow stickers of the valve box. (therefore the cable terminals valves 1 – ...

  • Page 11

    " 1 2 3 4 5 6 c c c c v connect a cable of the valve v1 to the cable terminal 1 of the valve box. V connect a cable of the valve v2 to the cable terminal 2 of the valve box. V connect a cable of the valve v3 to the cable terminal 3 of the valve box. 11 en.

  • Page 12

    § 1 2 3 4 5 6 c c c c v connect the other cable of the valve v1 to a cable terminal c of the valve box. (all 4 cable terminals c are connected to each other and equivalent). V connect the other cable of the valve v2 to a cable terminal c of the valve box. V connect the other cable of the valve v3 to...

  • Page 13

    To connect the valve box to the irrigation control: tip: press down the cable terminal with your index finger, screwdriver or ballpoint pen to connect the cables. With the gardena connection cable art. 1280 you can connect up to 6 valves with the irrigation control. $ 1 2 3 4 5 6 c c c c 1 2 3 4 5 6...

  • Page 14

    % 1 2 3 4 5 6 c c c c 1 2 3 4 5 6 c c c c 24 vac valves s/n: 00000000 top reset 5s master 1 2 3 4 5 6 c c m v connect one cable terminal c of the valve box to the blue cable terminal c of the irrigation control. 14 en.

  • Page 15: To Connect The Pump:

    To connect the pump: master channel: the master channel m is activated as soon as a valve is activated. For example, you can activate a garden pump via the master channel so that the pump supplies the irrigation system whenever a valve is activated. For example, the pump can be operated using the ga...

  • Page 16: To Connect The Power Supply:

    To connect the power supply: caution! The irrigation control is damaged if the power supply unit is con­ nected to cable terminals other than the 24 v (ac) cable terminals! V connect the power supply unit to the 24 v (ac) terminals only! Caution! Damaging of the irrigation control system by short ci...

  • Page 17

    / 1 2 3 4 5 6 c c c c 1 2 3 4 5 6 c c c c 24 vac power supply 24 vac valves s/n: 00000000 top reset 5s master 1 2 3 4 5 6 c c m 1. Connect both cables to the cable terminals 24 v (ac) of the irrigation control (polarity does not have to be considered). 2. Plug the power supply unit into an socket. 1...

  • Page 18: To Close The Cover:

    To close the cover: 24 vac valves s/n: 00000000 top reset 5s master 1 2 3 4 5 6 c c m (4) (3) 1. Attach the cable strain relief (4) and tighten the two screws (3) . 2. Push the cover onto the irrigation control. 18 en.

  • Page 19: 4. Operation

    4. Operation led display: (3) (1) (2) (1) led power: green: power on (2) led connection display / signal: green flashing: while connecting green: signal strength high yellow: signal strength medium red: overcurrent/undercurrent red flashing: valve error (3) led active watering: green 19 en.

  • Page 20

    Operation with the gardena smart system app: you can use the gardena smart system app to control all smart system products from anywhere at any time. You can download the free gardena smart system app from the apple app store or from the google play store. In order to include, a gardena smart gatewa...

  • Page 21: Factory Reset:

    Factory reset: 24 vac valves s/n: 00000000 top reset 5s master 1 2 3 4 5 6 c c m (5) the smart irrigation control will be reset to the factory settings. V push the reset key (5) for a short time. New connection. – or – v push and hold down the reset key (5) for at least 5 seconds. Cancels the existi...

  • Page 22: 5. Maintenance

    5. Maintenance to clean the irrigation control: do not use caustic / abrasive cleaning agents. V clean the irrigation control with a damp cloth (do not use solvent). 6. Storage to put into storage: the product must be stored away from children. V do not store the irrigation control outdoors if not i...

  • Page 23: 7. Troubleshooting

    7. Troubleshooting problem possible cause remedy led illuminates red overcurrent / undercurrent. V check the power connection. Led flashes red valve error. V check whether the valve requires too much current. Watering program is not being undertaken (no watering) the valve has previously been manual...

  • Page 24: 8. Technical Data

    8. Technical data unit value (art. 19032) operation temperature range (outdoors) °c + 5 – + 40 srd: frequency range mhz 863 – 870 maximum power mw 25 free field radio range (approx.) m 100 power supply mains voltage v (ac) 230 mains frequency hz 50 rated power w 22 standby power (approx.) w 3 output...

  • Page 25: 9. Accessories

    9. Accessories gardena pump control art. 1273 gardena watering valve 24v art. 1278 gardena valve boxes art. 1254 / 1255 gardena connection cable art. 1280 gardena cable clips art. 1282 25 en.

  • Page 26: 10.  Service / Warranty

    10. Service / warranty service: please contact the address on the back page. Warranty: in the event of a warranty claim, no charge is levied to you for the services provided. Gardena manufacturing gmbh offers a two-year warranty (effective as of the date of purchase) for this product. This warranty ...

  • Page 27

    27 deutschland / germany gardena manufacturing gmbh central service hans-lorenser-straße 40 d-89079 ulm produktfragen: (+49) 731 490- 123 reparaturen: (+49) 731 490- 290 service @ gardena.Com albania cobalt sh.P.K. Rr. Siri kodra 1000 tirana argentina husqvarna argentina s.A. Av.Del libertador 5954 ...