Gardena T 1030 D Operating Instructions Manual - page 8
8
GB
To protect your Water Timer against theft, the
GARDENA Anti-
Theft Protection Art. No. 1815-00.791.00
is available from the
GARDENA Service.
1. Fasten the bracket
7
to the back of the Water Timer using
the screw
8
.
2. The bracket can be used to attach a chain, for example.
The screw cannot be loosened once it has been screwed in.
In addition to time-based watering, it is also possible to include
the soil moisture or rain sensor in the watering program.
If the soil is moist enough, the program will be stopped, or the
program will be prevented from starting. Manual operation via
On / Off
is unaffected by this.
1. a) Place soil moisture sensor in the watered area
b) place rain sensor (with extension cable if necessary)
outside the watered area.
2. Insert the sensor in the sensor connection
9
of the Water
Timer.
Installing the anti-theft
protection (optional) :
Connect soil moisture
or rain sensor (optional) :
8
7
9