Gardena TL 21 Operating Instructions Manual - page 4
11
G
Running time with Accu A 12 /
Accu-Pack AP 12
approx. 15 min
Cord
approx. 1.4 mm
Cutting width
210 mm
Cord length
4 m
Weight (without Accu)
1.1 kg
Rpm of filament cassette
max. 11,000 rpm
Working area related emission
characteristic value
L
PA
1)
80 dB (A)
Noise level L
WA
2)
94 dB (A)
Vibrations
a
vhw
1)
< 2.5 ms
- 2
Measuring method 1) according to EN 786 2) according to 84 / 538 / EC
GARDENA accu-system V12 Trimmer TL 21
1. Technical data
Please read and follow these
operating instructions carefully.
Familiarise yourself with the
unit’s features, its proper use
and the safety instructions in-
cluded.
A
For safety reasons chil-
dren under the age of 16
or people who are not familiar
with these operating instruc-
tions should not use this
trimmer.
Please keep these operating
instructions in a safe place.
2. Notes on operating instructions
The GARDENA Trimmer TL 21
is designed for trimming / cutting
lawn areas in private home and
hobby gardens.
These trimmers are for private
use only and are not designed
for use in public facilities, parks,
sporting grounds, on roads, in
agriculture or forestry.
It is essential to observe the
manufacturer’s operating instruc-
tions to ensure the unit’s proper
functioning. These instructions
also contain advice for service,
maintenance and repair.
A
Attention! For safety
reasons the unit must not
be used for hedge trimming
or for chopping up for com-
posting.
4. Proper use
This Trimmer is one of the tools
in the extensive range of
accu-system V12 equipment
from GARDENA.
Please use the following articles
from the accu-system V12
programme to operate this tool:
1. Power supply:
accu-system V12 Accu A 12,
Art. no. 2109,
or
accu-system V12 Accu-Pack
AP 12, Art. no. 2110
2. Charging unit:
accu-system V12 Battery Charger
NL 12, Art. no. 2105,
(for Accu A 12 and Accu-Pack
AP 12)
accu-system V12 High-Speed
Battery Charger SL 60,
Art. no. 2100 (only for Accu-
Pack AP 12, Art. no. 2110)
3. Introduction