Garland BEST 100 DPE Instruction Manual - 9. Troubleshooting
English
36/120
English
37/120
In any other case, take the machine to your nearest after sales service.
9. TROUBLESHOOTING
Depending on the symptons that you observe, you can probably know the cause of the problem and could even
solve it:
Problem
Cause
Action
Engine does not work
The machine is not connected
Plug the machine to the mains
Damaged cable
Take the machine to the service dealer.
Never try and repair a cable with tape
Switch damaged
Take the machine to the service dealer
Brushes worn out
Take the machine to the service dealer
Abnormal noises
Bloqued cutting tool
Unplug the machine, wait for cutting tool
to stop and remove elements blocking the
cutting tool
Loose cutting tool
Check and tighten the cutting element. If
the noise persists take your machine to the
after sales service dealer.
Abnormal vibrations
Blades worn out or damaged
Substitute the blades
Internal engine or transmission
problem
Take the machine to the service dealer