Garland BEST 321 PG Instruction Manual - 3. Warning Symbols
English
32/148
English
33/148
Warning labels indicate required information for the
use of the machine.
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Air positions:
Do not let people enter in the work area.
This area will be of a diameter of 15
meters from the point in which you are
working.
Warning and care.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95 and
synthetic oil for 2 stroke engines to
2.5% (40:1).
3. WARNING SYMBOLS
4. MACHINE SYMBOLS
Caution! Maximun speed of gear
XXXX min
-1
.
Sense of rotation.
Maximum tool rotation
speed.
XXXX min
-1
.
XXXX min
-1
.
Positions start switch located on the right
handle of the machine.
“O” = Off (The machine don´t work)
“I”= On (The machine is ready to work)
STOP -
0
I