Garland GRASS 1055 ZSH Instruction Manual - 6.  Start Up Instructions

English  

40/168

English

41/168

 6.  START UP INSTRUCTIONS

6.1. UNPACKING AND LIST OF MATERIALS

This machine includes the following items that you will 

find inside the box:

• Machine.

• Upperhandle.

• Lowerhandle.

• Bag.

• Mulchingcap.

• Lateraloutputdeflector.

• Upperhandlescrewandwingnut(2).

• Lowerhandlenuts.

• Lowerhandlescrews.

• Cableengagementcirclip.

• Instructionmanual.

Carefully remove all items from the box and make 

sure that all listed items are present. Carefully inspect 

the product to ensure that there are no damaged 

elements.

If you find any damaged or missing parts, do not use 

the machine until the defect has been repaired or 

all the missing pieces replaced. Using the machine 

without all of its parts or with defective parts can 

cause severe personal injury.

6.2. ASSEMBLY

6.2.1. ASSEMBLING THE HANDLEBAR

Place the lower handlebar and once the screws have 

been inserted tighten the nuts.

Position the upper handle on the lower handlebar and 

once the screws have been inserted tighten the wing 

nuts.

Place the cable engagement circlip.

6.2.2.  ASSEMBLING THE SACK

Lift the rear outlet cover and engage the protrusions 

on the chassis of the bag rear cover axle.