Garland technology modular chassis available in 1u (4 slots) and 2u (12 slots) ac or dc power with filtering backplane the m1gxxce filtering backplane chassis can receive up to 4 or 12 1gbps modules depending on whether the chassis is a 1u chassis or a 2u chassis. Both chassis are equipped with dual...
Carefully unpack the chassis and install it into a 19" equipment rack. The model m1g1xce will require 1u of rack space and the model m1g2xce will require 2u of rack space. You will need 2 ac or dc connections to apply power to the two internal power supplies. Now insert your garland technology modul...
Accessing the garland technology modular chassis with filtering backplane: connect to the rj-45 management port using the supplied cable. You will need a serial terminal emulator like putty using the settings listed below: user name: admin user password: gtadmin1 bits per second: 115200 data bits: 8...
Page 4 page 4 v veerr 1 1.. 6 m1g2ace/m1g2dce m1g1ace/m1g1dce m1g2ace/m1g2dce m1g1ace/m1g1dce figure 5: here is where the static ip address can be changed so you can log into the network via the ethernet port garland technology m1g1ace (code version 1.0.21) network configuration warning: this sessio...
Page 5 page 5 v veerr 1 1.. 6 m1g2ace/m1g2dce m1g1ace/m1g1dce m1g2ace/m1g2dce m1g1ace/m1g1dce garland technology m1g1ace (code version: 1.0.21) upgrade menu 1. Upgrade using download file version 1.0.21 0. Exit select: the ability to download upgrades to the m1gxxce chassis through the network is a ...
This screen provides the chassis serial number and the condition of the power supplies as to whether they are up or down it also displays the model number of the modules inserted in the chassis if a module is present. Pressing number 1 through 4 will select the slot of the module you want to manage....
Page 7 page 7 v veerr 1 1.. 6 figure 11: show status of the module of the selected slot 2 selecting slot brings up the slot 2 status screen ========================= slot 2 status: ========================= port a port b port c port d link state: down down down down speed: duplex: media type: rj45 r...
Figure 13: show speed setting of the selected module page 8 page 8 v veerr 1 1.. 6 pressing when on the slot 1 status screen of a copper tap module, will bring up this screen. ========================= slot 1 speed mode configuration ========================= current speed: 1g new speed: 1g 1. 1g 2....
Page 9 page 9 v veerr 1 1.. 6 pressing when on the slot 1 status screen of a copper tap module, will bring up the duplex configuration screen. ========================= slot 1 duplex configuration ========================= current mode: link: port a port b port c port d new duplex: auto auto auto au...
Pressing b when on the slot status screen of a copper tap module, will bring up this restore defaults screen. Pressing #2 on the main menu screen, will begin the filtering setup process. We will set up filters for layer 2, layer 3 and layer 4; filtering figure 19: restore defaults garland technology...
Page 11 page 11 v veerr 1 1.. 6 layer 2 filtering layer 2 filtering allows filtering on source mac address, destination mac address or the vlan id. These may be used in any combination with each other or any other filter field. Garland technology m1g1ace (code version:1.0.21) row 1 filters no filter...
Page 12 page 12 v veerr 1 1.. 6 we now have a filter case 432a which can send traffic from ports b2 and a4 to port d4 (slot 2 port b and slot 4 port a to slot 4 port d). At this point all traffic will be sent as no filters have been defined. Note the presence of the s in the menu. This indicates tha...
Layer 3 filtering can target all ip messages or all non-ip messages. When ip is selected, the other layer 3 filter fields appear on the menu, these are source ip address, destination ip address, and dscp. These may be used in any combination with each other or any other filter as long as ip messagin...
Page 18 ver 1. 6 layer 4 filtering captures protocols riding on layer 3 ip. Specifically the ip port number, 0-255, which identifies the layer 4 protocol in the packet. Two of the protcols, tcp=6, and udp=17, contain source and destination ports which can also be used as keys for filters. Layer 4 fi...
M1g1ace/m1g1dce rack mount space: size dimensions weight: ambient temperature: operating relative humidity: storage temperature: voltage (ac/dc): current (max): 1u (w x h x d): 17.44 x 1.72 x 13.32 inches 6.8 lbs 0°c to+40°c/+32°f to+104°f 90% non-condensing -20°c to+70°c/-4°f to+158°f 100-240 volts...
Part numbers and descriptions page 22 page 22 v veerr 1 1.. 6 part no. Description m1g1ace 1u modular chassis with dual internal ac power supplies, supports up to four tap modules. Backplane feature can be used with all of garland technology s 1gbps modular taps that end with a letter f m1g1dce 1u m...
Pressing h will bring up the help screen on filtering menu page 23 page 23 v veerr 1 1.. 6 figure 82: help screen for the filtering menu thi s document is for informational purposes only . The information i n this document, believed by garland technology to be acc urate as of the date of publicati o...
