Garmin 1620 Quick Start Manual
© Copyright 2004 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151
st
Street, Olathe, Kansas 66062, U.S.A.
Part Number 190-00280-01 Rev. A
Managing a Route
Once you have selected a destination and calculated a route, you
can modify the route, preview turns, and save it for later reuse.
1. Tap the
Routes
icon on the Map Page tool bar to display the
Routes Page. Then tap the desired
Routes Option
icon.
2. Tap the
Turns Page
to view a list of turns for the route. Tap a
turn entry to preview the turn on the map.
3. Tap
Recalculate
if you have left the route and want to calculate
from your current location.
4. Tap the
Detour
icon if you want to detour the route around a
traffi c jam or road construction.
5. Tap the
Stop Navigation
icon if you want to quit the route.
6. Tap the
Route Preferences
icon if you want to change the way a route is managed in order to
meet your personal requirements.
7. Tap
Edit Vias
if you want to add some new points to alter your route.
8. Tap
Saved Routes
if you want to save the current route or view a previously saved route.
9. Tap
Speak
if you want to listen to current route status voice prompts.
The Routes Menu
cf Que
™
1620 Quick Start Guide
Start-Up and Satellite Acquisition
(For faster acquisition, set the Pocket PC’s clock before starting the Que Application)
1. Turn On the application by tapping the Garmin Que
icon from the Program Page or the Start Menu.
2. Observe the Map Page and the GPS status messages as
they appear at the top of the page.
• “No GPS Connected”- you have not installed the cf
Que fully into the CompactFlash card slot.
• “Waiting for GPS” - the Que application is making
contact with the cf Que module.
• “Acquiring Satellites” - the cf Que is search for satellites.
• “2D GPS Location” - the cf Que has a fi x on enough
satellites to establish its location.
• “3D GPS Location” - enough satellites are fi xed to
determine an elevation as well as ground location.
If the cf Que can’t get past the “Acquiring Satellites”
message, move to a location where you have a clear view of
the sky. Adjust the cf Que antenna to more of a horizontal
position. If you get an intermittent “Lost Satellite Signal”
message, move away from objects blocking the signal.
If you’re starting up for the fi rst time or you have moved
over 600 miles since last use, it must initialize (determine its
location by searching for satellites over your current loca-
tion). Use the Location option from the GPS Info Page Menu
to mark your approximate location so it knows to look only
for satellites that are overhead.
Once you begin to move, the message fi eld displays your
direction of travel or the next street intersection ahead.
Current Location
Next Street
Ahead
The Map Page
The Find Menu
Using the Find Feature:
1. Tap the
Find
icon on the Map Page tool bar to display the Find Menu.
2. Then select a category icon and tap it to open the search list. To
narrow the list of items, tap the second fi eld to display the list of
search options. Choose “Near Current Location”.
3. To shorten the list even more, tap the category fi eld to display
a list of sub-categories to refi ne the type of map item you are
searching
for.
3. To further shorten the search, enter a key word in the name of the
item you are searching for in the “Name” or “Containing” fi eld.
4. Select the desired destination and tap to highlight it. Then tap the
Routes
icon at bottom of the page to begin route calculation.
From the pop-up options window, select the calculation prefer-
ence and then tap
OK
to complete route calculation.
5. When complete the route will be displayed on the Map Page
along with navigation instructions and voice prompts.
Food and Drink Sub-Categories
Food and Drink Map Data Items
Navigating a Route on the Map
Find Menu Categories Icons
cf Q QS Review Format.indd 1
2/26/2004, 4:13:05 PM