Mode s transponder pilot’s guide gtx ™ 328.
© copyright 2007 garmin ltd. Or its subsidiaries all rights reserved except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of garmin. Garm...
Limited warranty this garmin product is warranted to be free from defects in materials or workmanship for two years from the date of purchase. Within this period, garmin will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no ...
The gtx 328 transponder is powered on by pressing the stby, alt or on keys, or by a remote avionics master switch (if applicable). After power on, a start-up page is displayed while the unit performs a self test. Mode selection keys off powers off the gtx 328. Pressing stby, on or alt key powers o...
Important codes: 1200 the vfr code for any altitude in the us (refer to icao standards elsewhere) 7000 the vfr code commonly used in europe (refer to icao standards) 7500 hijack code (aircraft is subject to unlawful interference) 7600 loss of communications 7700 emergency 7777 military interce...
Pressure alt: displays the altitude data supplied to the gtx 328 in feet, hundreds of feet (i.E., flight level), or meters, (dependent upon installation configuration. Flight time: timer start is configured as either manual or automatic. When manual, displays the flight time, controlled by the start/st...
Timer operation to operate the flight timer: 1. Press the func key until ‘flight time’ is displayed. 2. If the gtx 328 is configured with automated airborne determination, the timer begins automatically when the unit senses that the aircraft has become airborne. The timer may be reset to zero at ever...
Mode s data transmission in addition to 4096 code and pressure altitude, the gtx 328 is capable of transmitting aircraft identification, transponder capability and maximum speed range. “aircraft identification” is commonly referred to as flt id (flight identification). The gtx 328 may be configured by t...
Each time an alphanumeric character is entered, press the crsr key to move the cursor to the next blank field. Pressing the clr key moves the cursor back to the previous character. After the complete flt id is entered, press the crsr key to move the cursor to the “ok?” field. Press crsr again to accep...
© 2007 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151st street, olathe, kansas 66062, u.S.A. Garmin (europe) ltd. Unit 5, the quadrangle, abbey park industrial estate, romsey, so51 9aq, u.K. Garmin corporation no. 68, jangshu 2nd road, shijr, taipei county, taiwan www.Garmi...
