Instructions amps rugged mount montana ™ 600 series.
Ampsruggedmountinstructions warning see the important safety and product information in the montana product box before installing the rugged mount. Notice incorrectly wiring the power/audio cable with bare wire leads can result in damage to the vehicle or the battery. Garmin strongly recommends havi...
Ampsruggedmountinstructions connecting power to the mount notice if any wire is left unconnected, insulate the wire and safely secure it on your vehicle. 1. Select a location to mount the montana on your vehicle, based on available power sources, safe cable routing, and that the driver view is not o...
Ampsruggedmountinstructions attaching an amps base plate to the mount the amps mount is not included with the rugged mount. 1. Thread the screws ➊ through the washers ➋ , mount ➌ , and amps mount base plate ➍ (not included). ➊ ➋ ➌ ➍ ➎ 2. Tighten the nuts ➎ to secure the base plate. The recommended t...
1. Place the weather cap ➊ in the storage area on the mount. ➋ ➊ ➌ 2. Fit the bottom of your device into the cradle ➋ . 3. Tilt the device back until it snaps into place. 4. Using the security screw tool, tighten the security screw ➌ on the top of the mount. Note: if reflected light or glare makes t...
