Garmin Apollo GX60 Comm Installation Manual - page 59
Accessories
Apollo GX50/60/65 Installation Manual
51
These following West Coast Specialties annunciator provides the required annunciation for
the GX50/60 for IFR en route, terminal, and non-precision approach operation. The module is
standard with 28 volt bulbs and includes a wiring pigtail. See the instructions provided with
the annunciator module for complete specifications and installation instructions.
Garmin AT Part #:.................................... 145-2105
Manufacturer: ........................................... West Coast Specialties
Manufacturer #: ........................................ 90-81421-1
2.11
2.43
0.74
4-40 floating/locking
nut plate (2 places)
MSG
GPS PTK
WPT SEQ
OBS/HLD
APPRCH
ACTIVE
Momentary push button
The following annunciator provides the required annunciation for the GX65 for IFR en route
and terminal operation. See the instructions provided with the annunciator module for
complete specifications and installation instructions. The annunciator should be connected to
a suitable dimming circuit for night operation.
Audio Panel
The Apollo SL10 audio panel includes audio selection and a six place intercom, and,
depending on configuration, may also include a marker beacon receiver and stereo inputs. The
SL10 and SL15 audio panel configurations available are:
•
SL10
basic audio panel
•
SL10S
includes stereo inputs
•
SL10M
includes marker beacon receiver
•
SL10MS
includes marker beacon receiver and stereo inputs
•
SL15
basic audio panel
•
SL15
with DRAWS
•
SL15M
with marker beacon
•
SL15M
with DRAWS/marker beacon