Garmin Delta Upland Owner's Manual - Device Information
This allows the dog to get used to the device before you start
using it to correct the dog.
• Turn off the dog collar device and put it on the dog outside of
your training sessions.
This allows the dog to get used to the device and helps to
prevent the dog from associating the presence of the device
with training or obedience.
• Reward the dog with praise whenever the dog obeys a
command.
Training the Dog to Heel and Sit with the Collar
Before you begin training your dog using the collar, your dog
must show a grasp of the "heel," "sit," and "come" commands
while on the leash, you must put on the collar (
), and you must find the correct intensity level
(
Choosing the Correct Intensity Level
When beginning collar training, start with the "heel" and "sit"
commands.
1
With the dog at your side on a leash, pull up on the leash,
and command the dog to "sit."
2
If the dog does not sit immediately, press a training key
briefly, and repeat the command to "sit."
3
Reward the dog with praise when the dog obeys the
command.
After the dog begins obeying the "sit" command without
collar stimulation, you should move on to the "heel"
command.
4
With the dog at your side on a leash and with the collar on,
command “heel” and begin walking forward while gently
pulling on the leash.
5
If the dog not heel, press a training key briefly, repeat the
command to “heel”, and move in another direction or pull
back on the leash.
6
Reward the dog with praise when the dog obeys the
command.
Training the Dog to Come Here with the Collar
Before you begin training your dog to come "here" using the
collar, your dog must have a strong grasp of the "heel" and "sit"
commands using the collar, you must put on the collar (
), and you must find the correct intensity
Choosing the Correct Intensity Level
). Also, you may
need to use a long leash to effectively train "here."
1
With the dog in a sitting position, move away to the end of
the leash.
2
Command the dog to come “here.”
3
If the dog does not move immediately toward you, press a
training key briefly, gently tug on the leash, and repeat the
command to come "here."
4
Reward the dog with praise as soon as the dog begins to
move toward you.
5
If the dog begins to veer away, press a training key briefly,
and repeat the command to come "here."
Bark Correction Mode
When you enable bark correction mode, the handheld device
automatically activates a stimulation when the dog collar device
detects a bark. The system starts at the lowest intensity level
and increases the intensity level automatically based on the
dog's barking behavior. After bark correction mode is enabled, it
may take up to one minute for the system to increase to an
intensity level that discourages the dog from barking.
Enabling Bark Correction Mode
When bark correction mode is enabled, the device corrects the
dog's barks automatically, and you cannot use the training keys
to correct the dog.
Select until
appears on the LCD display.
The status LED on the dog collar device flashes three times
when the device enters bark correction mode.
TIP: Occasionally, the dog collar device may not enter bark
correction mode. With
selected on the LCD display, you can
select any training key to force the device to enter bark
correction mode.
Device Information
Delta Upland Handheld Device
Specifications
Battery type
Rechargeable, replaceable lithium-ion
Battery life
60 hours typical use
Operating temperature range
From -4° to 158°F (from -20° to 70°C)
Charging temperature range
From 32° to 104°F (from 0° to 40°C)
Storage temperature range
From -4° to 122°F (from -20° to 50°C)
Water resistance
IEC 60529 IPX7
Wireless range (Delta Upland)
0.5 mi. (0.8 km)
Wireless range (Delta Sport -
outside North America)
0.5 mi. (0.8 km)
Wireless range (Delta Sport -
North America)
0.75 mi. (1.2 km)
Delta Upland Dog Collar Device
Specifications
Battery type
Rechargeable, replaceable lithium-ion
Battery life
60 hours typical use
Operating temperature range
From -4° to 158°F (from -20° to 70°C)
Charging temperature range
From 32° to 104°F (from 0° to 40°C)
Storage temperature range (up
to 1 month)
From -4° to 122°F (from -20° to 50°C)
Storage temperature range (up
to 3 months)
From -4° to 104°F (from -20° to 40°C)
Storage temperature range (up
to 1 year)
From -4° to 68°F (from -20° to 20°C)
Water resistance
IEC 60529 IPX7
Beeper Device Specifications
Battery type
CR123A lithium
Battery life
Up to 100 hours run time
Operating temperature range
-4° to 110°F (-20° to 43°C)
Water resistance
IEC 60529 IPX7
Checking the Battery Charge Level of the
Dog Collar Device
Turn on the dog collar device.
The status LED flashes every few seconds while the device is
on. The color of the status LED indicates the battery charge
level.
Green
The battery has a good charge.
Yellow
The battery has less than a 50% charge.
Red
The battery should be charged soon.
Flashing Red The battery should be charged immediately. Training
features are disabled.
Delta Upland Battery Replacement
Instructions
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
6
Device Information