Garmin GDL 69/69A Installation Manual - page 18
Installation Procedure
Page 2-2
GDL 69/69A Installation Manual
Revision E
190-00355-02
2.3.2 Equipment Required But Not Supplied
• Wire: MIL-W-22759/16 or equivalent
• Shielded Wire: MIL-C-27500 or equivalent
• Hardware for Remote Mount Rack:
Vertical Mount: Four #8-32 Pan Head Screws (MS35206, AN526 or equivalent)
Horizontal Mount: Four #6-32 x 100° Counter-Sunk Flat Head Screw (MS24693, AN507R or
equivalent)
• Circuit Breaker: Appropriate for selected wire size
2.4 Equipment
Mounting
2.4.1 Rack Location and Installation
The GDL 69/69A may be mounted in a pressurized or unpressurized location. The GDL 69/69A does not
require forced-air cooling; when mounting, avoid locating the GDL 69/69A near sources that produce
high levels of heat. The GDL 69/69A has two mounting rack options available, the remote rack and the
modular rack for use with the G1000 system.
Figure 2-1. Suggested Mounting Locations for Remote Rack