Garmin GHP Compact Reactor Hydraulic Installaiton Instructions - page 12
Type
Sentence
grme
gsa
gsv
rmc
bod
bwc
dtm
gll
rmb
vhw
mwv
xte
Error and Warning Messages
Error Message
Cause
Autopilot Action
ECU Voltage is Low
The pump supply voltage
has fallen below 10 Vdc for
longer than 6 seconds.
• Alarm sounds
for 5 seconds
• Continues in
normal
operation
Autopilot is not
receiving navigation
data. Autopilot placed
in Heading Hold.
The autopilot is no longer
receiving valid navigation
data while performing a
Route To maneuver.
This message also
appears if navigation is
stopped on a chartplotter
before the autopilot is
disengaged.
• Alarm sounds
for 5 seconds
• Autopilot
transitions to
heading hold
Connection with
Autopilot Lost
The helm control has lost
connection with the CCU.
N/A
Lost Wind Data
(sailboat only)
The autopilot is no longer
receiving valid wind data.
• Alarm sounds
for 5 seconds
• Autopilot
transitions to
heading hold
Error: Lost
Communication
Between ECU and
CCU (when the
autopilot is engaged)
Communication between
the CCU and the pump has
timed out.
• The helm control
beeps, and
autopilot
transitions to
standby.
Registering Your Device
Help us better support you by completing our online registration
today.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Garmin
®
and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered
in the USA and other countries. GHP
™
, GHC
™
, Reactor
™
, and Shadow Drive
™
are
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without
the express permission of Garmin.
NMEA
®
, NMEA 2000
®
, and the NMEA 2000 logo are trademarks of the National Marine
Electronics Association. Uflex
®
and MasterDrive
™
are trademarks of the UltraFlex Group.
Teflon
®
is a trademark of DuPont
™
.
Discover other marine electronics & navigation on our website.