Garmin GHS 10 Installation Instructions Manual

Manual is about: Garmin Handset Microphone Installation Instructions

Summary of GHS 10

  • Page 1

    Vhf 100/200 series radio installation instructions these installation instructions are for the following vhf radios and handsets: north american models international models vhf 100 vhf 100i vhf 200 vhf 200i ghs 10 ghs 10i compare the contents of this package with the packing list on the box. If any ...

  • Page 2

    Vhf 100/00 series radio installation instructions installing your vhf 100/200 series radio 1. Select a location ( page 2 ). 2. Mount the radio ( page 2 ). 3. Connect the radio to power ( page 4 ). 4. Connect the radio to an antenna ( page 5 ). 5 mount the microphone hangar ( page 5 ). Although they ...

  • Page 3

    Vhf 100/00 series radio installation instructions flush mounting the vhf 100/200 series radio in addition to the four included 4.2 × 25 mm, panhead mounting screws, flush mounting the vhf 100/200 series radio requires the following tools (not included): phillips screwdriver drill and 9/64 in. (3.5 m...

  • Page 4

    Vhf 100/00 series radio installation instructions step 3: connect the vhf 100/200 series radio to power the vhf 100/200 series radios have a power-cable wiring harness that connects to power and provides interface capabilities for connecting external devices. Notes: the replacement fuse on the power...

  • Page 5

    Vhf 100/00 series radio installation instructions 5 step 4: connect the vhf 100/200 series radio to an antenna connect a marine vhf antenna to the radio using the antenna port on the rear panel of the radio. Mount the antenna according to the installation instructions provided with the antenna. Ante...

  • Page 6

    6 vhf 100/00 series radio installation instructions connecting a vhf 200 series radio to a nmea 2000 network the vhf 200 and vhf 200i radios can be connected to your existing nmea 2000 network, or you can build a basic nmea 2000 network to connect to another nmea 2000-compatible device, such as a ch...

  • Page 7

    Vhf 100/00 series radio installation instructions 4. Add additional t-connectors for each device you want to add to the nmea 2000 network, and connect each device to a t-connector with a drop cable. 5. Connect terminators (not included) to each end of the combined t-connectors. + - drop cable male t...

  • Page 8

    8 vhf 100/00 series radio installation instructions connecting the vhf 100/200 series radio to an external speaker (optional) the radio can be connected to an external speaker that allows you to hear your radio at a remote location. To mount the external speaker, refer to the installation instructio...

  • Page 9

    Vhf 100/00 series radio installation instructions vhf 100/200 series flush-mount template 6 15 / 32 in. (164 mm) 3 1 / 4 in. (82.4 mm) pilot hole 9 / 6 in. ( .5 mm) drill bit recommended clearance for distress key door recommended clearance for sun cover recommended clearance for sun cover handle.

  • Page 10

    © 2009 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, usa garmin (europe) ltd. Liberty house, hounsdown business park, southampton, hampshire, so40 9lr uk garmin corporation no. 68, jangshu 2nd road, shijr, taipei county, taiwan www.Garmin.C...