Ghs 20/20i handset installation instructions.
Ghs 20/20i installation instructions en-3 ghs ™ 20/20i installation instructions these installation instructions are for the ghs 20 and ghs 20i handsets. The ghs 20 is for use with the garmin ® vhf 200 or 300 radio and the ghs 20i is for use with the garmin vhf 200i or 300i radio. For additional inf...
En-4 ghs 20/20i installation instructions about the ghs 20 battery the ghs 20 contains a lithium-ion battery that charges when the handset is placed in the properly installed cradle. An led above the channel knob on the ghs 20/20i indicates the charging status: • off—not charging • solid—charging • ...
Ghs 20/20i installation instructions en-5 3. Use a ⅛ in. (3 mm) drill bit to drill the two pilot holes. 4. Use the included 25 mm m4.2 × 1.4 panhead screws to attach the gwh 20 to the surface. 5. Route the gwh 20 cable to the vhf 200/200i or the vhf 300/300i. 6. Perform an action: • on a vhf 200/200...
En-6 ghs 20/20i installation instructions 7. When the handset makes a sound, select ok on the handset to complete the pairing. 8. Repeat steps 4–7 for each additional handset. After a handset has been paired with the gwh 20, you do not need to pair it again. It will connect automatically when the ha...
Ghs 20/20i installation instructions en-7 1. On the vhf 200/200i or on the primary vhf 300/300i (station 1) ghs 10/10i handset, select menu > communications > connections > [device name] > disconnect. 2. Select yes to confirm and disconnect the ghs 20/20i. Ghs 20/20i specifications specification mea...
