1. DL manuals
  2. Garmin
  3. Marine Radar
  4. GMR 190-00669-02
  5. Installation Instructions Manual

Garmin GMR 190-00669-02 Installation Instructions Manual

Manual is about: Garmin Marine Radar Installation Instructions

Summary of GMR 190-00669-02

  • Page 1

    Gmr 404/406 marine radar installation instructions.

  • Page 2

    © 2006–2010 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, usa tel. (913) 397.8200 or (800) 800.1020 fax (913) 397.8282 garmin (europe) ltd. Unit 5, the quadrangle, abbey park industrial estate, romsey, so51 9lr, uk tel. +44 (0) 870.8501241 ...

  • Page 3

    Gmr 404/406 marine radar installation instructions w elcome thank you for choosing the garmin gmr 404/406. These instructions help you assemble and install the gmr 404/406 radar. To install your garmin chartplotter, consult the installation instructions packaged with the chartplotter. Product regist...

  • Page 4

    I nstallation installing the scanner the following section covers the assembly and installation of the gmr 404 or gmr 406 marine radar. The gmr 404 and 406 only operate with components of the garmin marine network, and mfds (multifunction displays). See your garmin dealer or the garmin web site for ...

  • Page 5

    Gmr 404/406 marine radar installation instructions step install the mounting studs and seals: 1. Remove the hatch on the front of pedestal by loosening the screw and lifting the hatch off of the hinges as shown in figure 1. 2. Using a 5 mm allen wrench, install the m10 x 71 mounting studs (figure 2)...

  • Page 6

    4 gmr 404/406 marine radar installation instructions step mount the antenna: 1. Remove the protective cover from the pedestal wave guide. 2. Verify that the antenna wave guide is aligned with the pedestal wave guide and slide the antenna onto the pedestal. 3. Secure the antenna to the pedestal using...

  • Page 7

    Gmr 404/406 marine radar installation instructions figure 9 figure 10 figure 8 step install the cable assembly route the cable as needed, depending on the type of mount you are using. Do not cut the cable! It may be necessary to drill a 31.7 mm (1.25") hole for routing the power/network cable. Garmi...

  • Page 8

    6 gmr 404/406 marine radar installation instructions step connecting the scanner connect the scanner power cable (red and black) to voltage converter output cable (red and black) using the supplied heat-shrink crimp connectors. Do not cut the scanner cable and do not remove the in-line fuse located ...

  • Page 9

    Gmr 404/406 marine radar installation instructions step connection the network: for a stand-alone network (chartplotter and radar only), attach the rj-45 marine network cable to the rj-45 socket on the back of the chartplotter. For an expanded network (chartplotter, radar, gms 10), attach the rj-45 ...

  • Page 10

    8 gmr 404/406 marine radar installation instructions radar setup to take advantage of the gmr 404/406 features, the garmin marine network may require a software update. A software update card is provided in the marine data management kit. The newly installed gmr 404 or 406 will not transmit until th...

  • Page 11

    Gmr 404/406 marine radar installation instructions specifications 4 ft open-array antenna: type: end fed slotted waveguide horizontal beamwidth: 1.8 degrees horizontal sidelobes: -23 db within ±10 deg of main -30 db outside ±10 deg of main vertical beamwidth: 24 degrees antenna gain: 29 dbi polariza...

  • Page 12

    0 gmr 404/406 marine radar installation instructions antenna rotation: 24 rpm and 48 rpm maximum wind load: 100 kts receiver noise figure: less than 4 db environmental: temp: 14 to 140º f (-10 to +60º c) humidity: 95% @ 95 ºf (35 ºc) rel wind: 100 kts waterproof to iec 60529 ipx6 range: 65.5 ft (20 ...

  • Page 13

    Gmr 404/406 marine radar installation instructions 5.91″ 5.51″ 7.87″ 7.87″ l 12.87″ 326.8 mm 12.34″ 17.35″ model l gmr 404 51.6" [1310 mm] gmr 406 75.7" [1923 mm] 313.5 mm 440.8 mm 200.0 mm 200.0 mm 140.0 mm 150.0 mm.

  • Page 14

    Gmr 404/406 marine radar installation instructions failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. • use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring preci...

  • Page 15

    Gmr 404/406 marine radar installation instructions software license agreement by using the gmr 404/406 , you agree to be bound by the terms and conditions of the following software license agreement. Please read this agreement carefully. Garmin grants you a limited license to use the software embedd...

  • Page 17

    For the latest free software updates (excluding map data) throughout the life of your garmin products, visit the garmin web site at www.Garmin.Com. © 2006–2010 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, usa garmin (europe) ltd. Unit 5, t...