Garmin GPS 10x Setup - Charge The Gps 10X Receiver
➋
Charge the GPS 10x Receiver
Charge the battery before you use the GPS 10x receiver.
1. Plugthesmallendofthepowercableintothe
mini-USBconnectorontheendoftheGPS10x
receiver.
2. Plugtheotherendofthepowercableintoan
availablepoweroutletinyourvehicle.
You can use the GPS 10x receiver while you are
charging it. It takes about four hours to charge the
battery. A fully charged battery lasts about 22 hours.
If you need to replace the battery, use a Garmin lithium-
ion battery pack (010-10840-00) or a compatible cell
phone battery, such as a Nokia BL-5C.
➌
Turn On the GPS 10x Receiver
Press and hold the Power button to turn the 10x on.
Bluetooth LED Status
• Rapid Flashing Blue: power on, Bluetooth on
• Slow Flashing Blue: Bluetooth link to your mobile
device established
Power LED Status
• Flashing Yellow Green: charging in progress
• Solid Yellow Green: battery is charged
• Flashing Orange: low battery
• Solid Orange: faulty battery or system error
➍
Pairing the GPS 10x
Note: Refer to your mobile device’s documentation
for specific instructions about enabling the Bluetooth
wireless technology and connecting to devices.
1. EnsurethattheGPS10xreceiveriswithin30feet
(10meters)ofyourmobiledevice.
2. TurnontheGPS10Xandyourmobiledeviceand
enabletheBluetoothcomponent.
3. UsetheBluetoothsettingsonyourmobiledevice
tosearchfortheGPS10xandconnecttoit.
4. AfterconnectingtotheGPS10x,youmayneed
tomakenoteoftheCOMportnumberthatthe
BluetoothsoftwarehasassignedtotheGPS10x
anduseitinyournavigationsoftware.
Note: The GPS 10x receiver PIN/passkey is 1234.